最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

Abstract:In the paper, authors present the basic principles and technological features of the new processing technologies of the metalmatrix composite, such as self propagating high temperature synthesis.XD synthesis, Directed metal oxidation (Dimox) synthesis, Lancide synthesis and Spray- Atomized and codeposied synthesis,illustrate the mechanical properties of the metal matrix composites produced by the above- mentioned approaches, analysis advantages and shortcomings of different approacbes and pointout that SHS,XD,Dimox and Lanxide approach belong to the in stiu processing. Composites containing reinforcement generated in stiu are likely to have the advantages of .virgin uncontaminated intedeces and can be fur,ther tailored during sikudufucation processing to promote adequate bonding between the matrix and the reinforcements. In addition,this route of synthesis of composites may be more ecnomic as the reinforcements are not tnanufactured and handled separately.The shortcomings of the .in stiu processing are that the composites POssess low density and the quantity of the reinforcements can not be controlled easily. Spray atomization and codeposition processes belong to the rapid solidification technology.The basic thenes of the new processing technologies above should be created as the processiny,technologics are imprproved further.

Abstract:In order to give a necessary information for the research on Bi system superconductor, the newest results of phase relations in Bi-Pb-Sr-Ca-Cu-O system since 1991 have been reviewed, which include Ca-Cu-O ternary, Sr-Cu-O ternary, Bi2O3-CuO pseduo-binary, (Bi, Pb)2Sr2CuOx-CaCuO2 pseduobinary, Bi2O3-CaO-CuO pseduo-ternary. Bi2O3-SrO-CaO pseduo-ternary and Bi2O3-SrO-CuO-MO(M =Ca, Pb) pseduo-quarternary system. In addition. the new result of Ag-Cu-Pb-O system has also been discussed which is related with Bi(2223) / Ag tape and Ag-doped Bi-based Superconductor.

Abstract:The possible slipping and twinning modes in hop metals are summarized. The slipping plane includes (0000) hasal. (1100)prismatic plane and c-type. c+a-type Pyramidal plane. {1012}. {1121}and {112 2}are the primary twinning modes. {1011} {1124}and {1123}type twins are possible to appear in Ti and Zr.The relationship between slipping mode and the tasting temperature in Ti and Zr is discussed. The slipping planes arranged in order of ease of operation are prismatic.pyramidal and hasal planes.

Abstract:This paper describes the main character and important application of beryllium materials in the world high technology, as well as the production and application of beryllium in China.

Abstract:Miedema theory has been applied to studying systematically the thermodynamical properties of rare earth-magnesium. The eding enthalpies of liquid alloys and formation enthalpies of intermetallic compounds have been calculated. The calculations agree well wity the available experimental resultS or the predictions of other authors.

Abstract:Pole figure and inverse pole figure are introduced firstly, and both of them have been widely used in texture analysis as they are convenient in determining and recognizing. Then, the following are presented in details: the orientation distribution function (ODF), principle and calculation -process. The influence of Friedel Law on the results of ODF analysis, as well as much attempt to get complete ODF are also introduced in the present paper. Maximun Entropy Method applied to ODF analysis is considered to be better way for quantitative texture analysis. Texture quantitative result will be more real if Maximum Entropy Method is introduced to ODF analysis.

Abstract:利用正交設計實驗的方法安排了一組Ｚｒ－Ｎｂ二元合金，考查了兩個水平的Ｎｂ含量，淬火溫度，時效溫度，時間以及合金組織狀態對耐蝕性能的影響，５００℃蒸汽腐蝕結果表明，Ｎｂ含量控制在固溶極限范圍內Ｚｒ－Ｎｂ二元含金具有較佳的耐蝕性，而當Ｎｂ含量較高時，采用雙相區淬火，較高溫度長時間時效處理是獲得較好耐蝕性的工藝方向。

Abstract:Apresentation is given of the discribtion of wave pattern,vartex, meten zone in the interface of explosive bonded layer metal composite by means of melallographic observation. The issues, which should be pay attention to also introduced for explosive bonded layer metal composite.

Abstract:研究了加工熱處理工藝對Ｚｒ－４合金管材機械性能和耐蝕性能的影響。實驗表明，工序中加入β淬火處理，可以改善合金的性能。擠壓前坯料β淬火后直接軋至成品的管材，再結晶退火后在３７５℃下的屈服強度為２０４￣２１８ＭＰａ，較經過多次軋制到成品的管材，其屈服強度提高了４２％￣４７％。加工過程中降低中間退火溫度，減少加工道次的管材，在相同條件下的屈服強度為１８０￣１８８ＭＰａ。對合金管材進行了４００℃和５００℃

Abstract:用Ｙ、Ｂａ、Ｃｕ的三氟乙酸鹽溶液，通過ＭＯＤ法在ＳｒＴｉＯ３（１００）襯底上成功地制得了黑色的、表面光滑的ＹＢＣＯ超導薄膜。研究了兩種理想的成膜燒結工藝，對膜進行了物相研究。結果表明：在８５０℃，潮濕氧氣氛中燒結的薄膜具有一定的擇優取向；而在７５０℃，潮濕的低氧氣氛中燒結的薄膜則具有高度的ｃ軸織構，前者的Ｔｃ（ｏｎｓｅ）≈９０Ｋ，Ｔｃ０≈７９Ｋ，較低的氧分壓似乎有利于ｃ軸結構。

Abstract:The recent progress of the practical application of catalytic kinetic photo-metric method in noble metals is described.

Abstract:The developing of facility for Al-Mo fusion alloying is introduced. By using the facility the environment will not be polluted, the working conditions can be improved. What's more, we' ll make the Al-Mo alloy with high quality and low cost, and it will be loaded and unloaded more easily and bring great economic income.