1}壓縮孿晶及{101}-{102}雙孿晶在協調合金的塑性應變中發揮了重要作用。此外，大量動態再結晶在壓縮孿晶及雙孿晶內部發生，并擴展到非孿晶區域，有效緩解了軋制過程中的內應力集中。上述2個過程對提高合金在大應變量軋制中的成形性均起到了促進作用。;The Mg-3Y (wt%) alloy sheet was fabricated by pre-extrusion and subsequent single-pass large strain hot rolling process. The influences of different twinning types on dynamic recrystallization (DRX) and grain structure evolution during large strain hot rolling were investigated. Results show that the alloy undergoes nearly complete DRX during pre-extrusion processing under a low extrusion ratio of 8:1. During subsequent large strain hot rolling processing, deformation twinning, especially the {101} compres-sion and {101}-{102} double twinning, plays an important role in plastic strain accommodation. Moreover, the compression twin and double twin assisted DRX occurs extensively within the grains, and the recrystallization region is extended from the twin interior towards non-twinned regions, greatly relieving the internal stress. Both of processes above promote the formability of the alloy during large strain hot rolling processing."/>