2; thermal shock; crack propagation"/> 2-Mo5Si3 bilayer structure to SiO2-MoSi2-Mo5Si3 multilayer structure. At the initial stage of the thermal shock, the longitudinal cracks were formed and gradually extended to the substrate, the longitudinal cracks run through the coating at the later thermal shock stage. In the meantime, the volatilization MoO3 leads to the increase stress in the interface of coating/substrate and produce transverse cracks."/>
Thermal shock behavior and crack propagation of MoSi2 coating on molybdenum alloy
DOI:
Author:
Affiliation:
School of Material Science and Engineering,Central South University
Clc Number:
Fund Project:
Article
|
Figures
|
Metrics
|
Reference
|
Related
|
Cited by
|
Materials
|
Comments
Abstract:
An adherent Si-Mo coating on Mo-based alloy was produced by fused slurry method. The thermal shock resistance of the coating was evaluated by cycle test from room temperature to 1600°C in air. Besides, the microstructures of the coating were analyzed by SEM, EPMA, WDS and XRD. The results showed that the coating could bear thermal shock for 400 cycles from room temperature to 1600℃. During the oxidating process, the coating evolved from the original MoSi2-Mo5Si3 bilayer structure to SiO2-MoSi2-Mo5Si3 multilayer structure. At the initial stage of the thermal shock, the longitudinal cracks were formed and gradually extended to the substrate, the longitudinal cracks run through the coating at the later thermal shock stage. In the meantime, the volatilization MoO3 leads to the increase stress in the interface of coating/substrate and produce transverse cracks.
Reference
Related
Cited by
Get Citation
[Xiao Lairong, Zhang Bei, Cai Zhenyang, Sun Guoji, Li Wei, Liu Jianfei, Piao Shengming. Thermal shock behavior and crack propagation of MoSi2 coating on molybdenum alloy[J]. Rare Metal Materials and Engineering,2018,47(11):3387~3392.] DOI：[doi]