3-10mass%?TiO3 at 960℃ were studied. The results obtained by XRF, XRD, SEM and EDS analysis show that the products mainly contain Al, Ti, Fe, and little Si, and the main phase of the product is Al3Ti. With the increase of reductant amount, the content of Ti in alloy products decreases, while the content of Fe in alloy products increases. In addition, the content of Al3Ti increases with the increase of reaction time. The highest content of Ti in the alloy obtained by aluminothermic reaction for 2h at 960℃ using three times reductant amount of theoretical amount is up to 18.82 mass%. Fe and Ti can be separated when FeTiO3 aluminothermic reduction was carried using lower reductant amount and higher reduction time. The FeTiO3 aluminothermic reduction reaction takes place between the dissolved Al atom and dissolved FeTiO3 in the Cryolite melt."/>
School of Materials and Metallurgy,Northeastern University,School of Materials and Metallurgy,Northeastern University,School of Materials and Metallurgy,Northeastern University,School of Materials and Metallurgy,Northeastern University,School of Materials and Metallurgy,Northeastern University,School of Materials and Metallurgy,Northeastern University,School of Materials and Metallurgy,Northeastern University
TF651
[Xie Kaiyu, Guan Pingping, Liu Aimin, Shi Zhongning, Hu Xianwei, Gao Bingliang, Wang Zhaowen. Aluminothermic Reduction of lunar soil simulant Ilmenite in Cryolite Molten Salt Media[J]. Rare Metal Materials and Engineering,2016,45(5):1278~1283.]
DOI:[doi]