-1條件下的高溫成形性能。設計了一套可一次性完成拉深、氣脹的模具?；谟邢拊抡婺M軟件PAM-STAMP對零件成形過程進行模擬，獲得了優化工藝參數并進行實驗驗證。結果表明：PAM-STAMP仿真軟件可以預測零件拉深和氣脹缺陷，優化了工藝參數和模具形狀并進行實驗驗證。實驗在800 ℃、氣體壓力2.5 MPa條件下獲得了壁厚、側邊高度均符合設計要求的零件，驗證了該拉深氣脹復合工藝的可行性。;In order to solve the problems of insufficient forming of complex box part in the single deep drawing, a precise hot forming process of deep drawing and gas bulging was proposed, and the shape and thickness of the formed parts could meet the design requirements. TC2 titanium alloy complex box part was selected as the research object in this research. The high temperature formability of TC2 titanium alloy was investigated at 550–800 °C and 0.001–0.1 s-1. A set of mold for deep drawing and gas bulging at one time was designed. The forming process of the complex box part was simulated based on the finite element simulation software PAM-STAMP, and the optimized process parameters were obtained and verified by experiments. Results show that the simulation software PAMSTAMP can effectively predict the part defects during deep drawing and gas bulging. The process parameters and mold shape are ameliorated and verified by experiments. Complex box part with thickness and height meeting the design requirements can be obtained under the conditions of 800 °C and gas pressure of 2.5 MPa, which verifies the feasibility of the composite process of deep drawing and gas bulging."/>