-11 m3/N·m），以及較高的硬度（HK0.05=38 000 MPa）和膜-基結合強度（LC2=53±1 N）。多層涂層相鄰層之間形成了較多的界面，有助于提高多層涂層的硬度和耐磨性。切削試驗結果顯示，當切削磨損標準VB=0.2時，AlCrN/AlCrVN-6涂層具有較高的硬度和耐磨性，最長的切削長度為7.4 m。;AlCrN/AlCrVN multi-layer coatings with different numbers (1, 2, 4, 6) of bilayers were deposited by arc ion plating method. The effects of multi-layer structure on microstructure, mechanical properties, tribological properties, and cutting performance were investigated. The results show that the deposited AlCrN/AlCrVN multi-layer coatings are mainly composed of solid solution (Al,Cr)N with preferred growth orientation of [111] crystal orientation. Compared with other multi-layer coatings, the lowest coefficient of friction (~0.46), the lowest wear rate of 0.15×10-11 m3/N·m, the highest hardness of HK0.05=38 000 MPa, and coating-substrate bonding strength of LC2=53±1 N can be achieved for AlCrN/AlCrVN multi-layer coating with 6 bilayers at high temperature. The improvement in hardness and wear resistance is due to the formation of more interfaces between adjacent layers. Cutting test results reveal that AlCrN/AlCrVN coating with 6 bilayers has the longest cutting length of 7.4 m under the cutting wear standard condition of flank wear VB=0.2 due to its relatively higher hardness and better wear resistance."/>