0.6336Cu0.1452Ni0.1012Al0.12)100-xTmx(x=0~5,原子分?jǐn)?shù))塊體金屬玻璃(BMG)合金,研究了Tm對合金力學性能和抗腐蝕性能的影響。結果表明,當Tm含量增加到3%時,其玻璃形成能力(GFA)和壓縮塑性顯著提高,但過量Tm會降低GFA。x=3時合金的最大過冷液相區寬度為100 K,抗壓強度為1669 MPa,塑性應變?yōu)?1.01%,遠高于Zr0.6336Cu0.1452Ni0.1012Al0.12 BMG的各項性能(67 K、1439 MPa和5.90%)。然而,電化學測試結果表明,x=3時的合金在3.5%(質量分?jǐn)?shù))NaCl溶液中的耐腐蝕性不佳,且其耐腐蝕性和力學性能隨Tm含量的變化趨勢與預期不同??赡苁怯捎谶^量添加稀土元素Tm,容易形成更多的氧化物,導致點蝕加劇。進一步添加Tm可以提高Zr基BMG鈍化膜的完整性和耐點蝕性能,但力學性能不理想。;A series of (Zr0.6336Cu0.1452Ni0.1012Al0.12)100-xTmx (x=0~5, at%) bulk metallic glass (BMG) alloys were fabricated by copper mold suction casting, and the effect of Tm on the mechanical and corrosion properties were investigated. The results show that when Tm content increases to 3at%, the glass forming ability (GFA) and compressive plasticity are significantly improved, whereas GFA is decreased by adding excessive Tm. The maximum supercooled liquid region width (ΔTx) of the alloy with x=3 is 100 K, the compressive fracture strength is 1669 MPa, and the plastic strain is 21.01%, which are much higher than those of the Zr0.6336Cu0.1452Ni0.1012Al0.12 BMG (67 K, 1439 MPa, and 5.90%). However, the electrochemical test results show that the alloy with x=3 does not have excellent corrosion resistance in 3.5wt% NaCl solution, and the change trend of corrosion resistance and mechanical properties with Tm content is different from the expectation. The possible reason is that the excessive addition of rare-earth element Tm easily causes more oxides, which leads to the severe pitting corrosion. Further addition of Tm can improve the integrity and pitting corrosion resistance of Zr-based BMG passivation film, but the mechanical properties are not ideal."/>

最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
網刊加載中。。。

使用Chrome瀏覽器效果最佳,繼續瀏覽,你可能不會看到最佳的展示效果,

確定繼續瀏覽么?

復制成功,請?jiān)谄渌麨g覽器進行閱讀