最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
TA18高強鈦管數控彎曲成形截面扁化研究
DOI:
作者:
作者單位:

河南科技大學,河南科技大學,西北工業大學,河南科技大學,河南科技大學,河南科技大學,河南科技大學

作者簡介:

通訊作者:

中圖分類號:

基金項目:

中國博士后科學基金(2016M590677),河南省基礎與前沿技術研究基金資助項目(162300410211),西北工業大學凝固技術國家重點實驗室開放課題資助項目(SKLSP201631)


Research on section flattening in numerical control bending process of TA18 high strength tube
Author:
Affiliation:

Henan University of Science and Technology,Henan University of Science and Technology,Northwestern Polytechnical University,Henan University of Science and Technology,Henan University of Science and Technology,Henan University of Science and Technology,Henan University of Science and Technology

Fund Project:

The China Postdoctoral Science Foundation(2016M590677); The Basic and Advanced Technology Research Program of Henan Province(162300410211); The fund of the State Key Laboratory of Solidification Processing in NWPU(SKLSP201631)

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    截面扁化是管材彎曲成形過程中不可避免的物理現象，而嚴重的截面扁化會影響彎管件的合理裝配，從而制約其廣泛應用。本文建立了考慮收縮應變比和彈性模量變化的鈦管數控彎曲成形有限元模型，研究了不同幾何條件和不同工藝條件下TA18鈦管的截面扁化行為。結果表明：同時考慮收縮應變比和彈性模量變化規律可使截面扁化量發生改變，對變化規律無顯著影響。獲得了合理的幾何、工藝參數范圍。為研究TA18鈦管的成形預測與控制并最終實現精確成形提供了依據。

    Abstract:

    Section flattening is an inevitable physical phenomenon in the forming process of tube bending, and severe section flattening will affect the reasonable assembly of the tube fittings, and therefore restricts its wide application. Finite element (FE) model for numerical control (NC) bending of titanium tube considering the variation law of contractile strain ratio (CSR) and the Young"s modulus (E) is established in this paper. The section flattening behaviors of TA18 tube under different geometric conditions and different process conditions have been investigated. The results show that considering the variation law of CSR-E can make the cross-section change, which has no remarkable influence on the change law. The reasonable range of geometric and process parameters are obtained, which provides a basis for studying the forming prediction and controlling the final precision for the NC bending of TA18 tube.

    參考文獻
    相似文獻
    引證文獻
引用本文

皇濤,楊方方,詹梅,郭俊卿,陳學文,陳拂曉,宋克興. TA18高強鈦管數控彎曲成形截面扁化研究[J].稀有金屬材料與工程,2018,47(8):2347~2352.[Huang Tao, Yang Fangfang, Zhan Mei, Guo Junqing, Chen Xuewen, Chen Fuxiao, Song Kexing. Research on section flattening in numerical control bending process of TA18 high strength tube[J]. Rare Metal Materials and Engineering,2018,47(8):2347~2352.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2017-09-06
  • 最后修改日期:2017-10-14
  • 錄用日期:2017-11-01
  • 在線發布日期: 2018-10-17
  • 出版日期: