最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
微弧氧化Mg-3Al-1Zn鎂合金應力腐蝕和腐蝕疲勞行為研究
作者:
作者單位:

太原工業學院機械工程系

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Stress corrosion cracking and corrosion fatigue behaviors of micro-arc oxidized Mg-3Al-1Zn alloy
Author:
Affiliation:

1.Department of Mechanical Engineering,Taiyuan Institute of Technology,No ,Xinlan Road;2.Shanxi Key Laboratory of Advanced Magnesium-Based Materials,School of Materials Science and Engineering,Taiyuan University of Technology

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    本文主要對微弧氧化Mg-3Al-1Zn鎂合金在空氣和3.5 wt.%硫酸鈉溶液兩種環境下的應力腐蝕和腐蝕疲勞行為進行研究，并討論其相互關系。微弧氧化處理后，Mg-3Al-1Zn鎂合金的耐蝕性能得到明顯改善。與Mg-3Al-1Zn鎂合金基體相比，在空氣中，微弧氧化后合金的應力腐蝕和腐蝕疲勞強度均下降了大約10 MPa。在3.5 wt.%硫酸鈉溶液環境中，微弧氧化后合金的腐蝕疲勞性能仍然是惡化的，但是應力腐蝕強度卻得到了顯著改善，從58.24 MPa提高至202.08 MPa。這表明材料的力學性能（應力腐蝕和腐蝕疲勞）并不是與其腐蝕性能完全保持線性關系的。微弧氧化處理后鎂合金在空氣中的應力腐蝕斷口為韌性斷裂，在硫酸鈉溶液環境中為解理斷裂。而其腐蝕疲勞斷口不論是在空氣中還是在腐蝕環境中均為解理斷裂。這主要是由于腐蝕環境和變換循環載荷的影響，兩者共同作用將會加速裂紋擴展。這表明，周圍環境和加載類型對材料斷裂機理有重要影響。

    Abstract:

    The stress corrosion cracking （SCC） and corrosion fatigue (CF) behaviors of micro-arc oxidized (MAO) Mg-3Al-1Zn alloy were conducted in air and 3.5 wt.% Na2SO4 solution, and their relations were discussed. The corrosion properties of the MAO Mg-3Al-1Zn alloy were improved significantly. Compared with those of the Mg-3Al-1Zn substrate, the SCC and CF strengthes of the MAO Mg-3Al-1Zn alloy were both reduced only about 10 MPa slightly in air. In 3.5 wt.% Na2SO4 solution, the CF properties were still degraded, but the SCC properties of the MAO specimens were enhanced apparently, from 58.24 MPa to 202.08 MPa. It indicated that the mechanical properties (SCC and CF) were not always linearly related with the corrosion resistance of the material. It was ductile fracture for the SCC specimens in air, and it was cleavage fracture in 3.5 wt.% Na2SO4 solution. While they were cleavage fractures for CF specimens regardless of the environments. This was due to the effect of the corrosive environment and alternating cyclic loading, which accelerated the crack propagation process. It displayed that the surrounding environments and loading types could affect the fracture mechanism of the material.

    參考文獻
    相似文獻
    引證文獻
引用本文

賀秀麗,閆志峰,梁紅玉,白瑞,佘銀柱.微弧氧化Mg-3Al-1Zn鎂合金應力腐蝕和腐蝕疲勞行為研究[J].稀有金屬材料與工程,2020,49(9):2997~3004.[He Xiuli, Yan Zhifeng, Liang Hongyu, Bai Rui, She Yinzhu. Stress corrosion cracking and corrosion fatigue behaviors of micro-arc oxidized Mg-3Al-1Zn alloy[J]. Rare Metal Materials and Engineering,2020,49(9):2997~3004.]
DOI：10.12442/j. issn.1002-185X. E20190094

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2019-07-27
  • 最后修改日期:2019-09-09
  • 錄用日期:2019-09-11
  • 在線發布日期: 2020-10-15
  • 出版日期: