最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
熱處理對干摩擦Ti6Al4V合金摩擦性能的影響
作者:
作者單位:

1.北京航空航天大學 機械工程及自動化學院，北京 100191;2.廣東省科學院 中烏焊接研究所，廣東 廣州 510650;3.北京航天發射技術研究所，北京 100076

作者簡介:

通訊作者:

中圖分類號:

基金項目:

National Natural Science Foundation of China (51975036)，廣東省重點研發專項 (2018B090904004)


Effect of Heat Treatments on Tribology Property of Ti6Al4V Alloy Under Dry Friction
Author:
Affiliation:

1.School of Mechanical Engineering & Automation, Beihang University, Beijing 100083, China;2.China-Ukraine Institute of Welding, Guangdong Academy of Sciences, Guangzhou 510650, China;3.Beijing Institute of Space Launch Technology, Beijing 100076, China

Fund Project:

National Natural Science Foundation of China (51975036); Guangdong Province Key R&D Project (2018B090904004)

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    對電子粉床熔合（EPBF）制造的Ti6Al4V合金分別進行1 h的600 ℃去應力退火、800 ℃退火和920 ℃固溶熱處理，然后對熱處理前后的試樣進行摩擦磨損實驗，分析比較摩擦磨損性能和機理。結果表明，600 ℃去應力退火+1 h熱處理后的試樣耐磨性能最佳，磨損質量減少了44%。800 ℃退火+1 h熱處理后的試樣減摩性能最好，摩擦系數減小了14%。本研究提供了一種簡單的熱處理方式，提高了EPBF制造Ti6Al4V合金的減摩耐磨性能。

    Abstract:

    Ti6Al4V alloy manufactured by electron powder bed fusion (EPBF) was separately heat-treated by stress-relief annealing at 600 °C, annealing at 800 °C, and solid solution at 920 °C for 1 h. Then, the friction and wear tests were conducted on the samples before and after heat treatment to analyze the properties and mechanism of friction and wear behavior. Results show that the sample annealed at 600 °C for 1 h has the optimal wear resistance, and the wear mass loss reduces by 44%. The sample annealed at 800 °C for 1 h possesses the optimal anti-friction performance, and the coefficient of friction reduces by 14%. This research provides a simple heat treatment method to improve the friction and wear resistance of Ti6Al4V alloy manufactured by EPBF.

    參考文獻
    相似文獻
    引證文獻
引用本文

黃俊媛,張偉,房衛萍,陳靜云.熱處理對干摩擦Ti6Al4V合金摩擦性能的影響[J].稀有金屬材料與工程,2024,53(8):2174~2181.[Huang Junyuan, Zhang Wei, Fang Weiping, Chen Jingyun. Effect of Heat Treatments on Tribology Property of Ti6Al4V Alloy Under Dry Friction[J]. Rare Metal Materials and Engineering,2024,53(8):2174~2181.]
DOI：10.12442/j. issn.1002-185X.20230675

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2023-10-29
  • 最后修改日期:2023-12-15
  • 錄用日期:2024-01-05
  • 在線發布日期: 2024-08-09
  • 出版日期: 2024-08-08