最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
鍍銅/鎳燒結釹鐵硼永磁體與DP1180鋼釬焊接頭的組織與性能
作者:
作者單位:

1.吉林大學 汽車材料教育部重點實驗室，吉林 長春 130022;2.吉林大學 深圳研究院，廣東 深圳 518057;3.上海航天控制技術研究所，上海 201109

作者簡介:

通訊作者:

中圖分類號:

基金項目:

Creation and Development technology project of Shenzhen, China (NO. 2021Szvup050), Shanghai Sailing Program （No. 23YF1417400）and 2020 Renewal Program of Jilin University (419080520464).


Microstructure and Properties of Soldered Joints of Cu/Ni- Coated Sintered-NdFeB Permanent Magnets and DP1180 Steel
Author:
Affiliation:

1.Key Laboratory of Automobile Materials Ministry of Education, Jilin University, Changchun 130022, China;2.Shenzhen Research Institute of Jilin University, Shenzhen 518057, China;3.Shanghai Aerospace Control Technology Research Institute, Shanghai 201109, China

Fund Project:

Creation and Development Technology Project of Shenzhen, China (2021Szvup050); Shanghai Sailing Program (23YF1417400); 2020 Renewal Program of Jilin University (419080520464)

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    采用Zn-6Sn-5Bi釬料對鍍Cu/Ni的燒結NdFeB永磁體和DP1180鋼進行釬焊連接，對比分析了2種鍍層條件下釬焊接頭的微觀組織和力學性能。結果表明，對于鍍Cu的燒結NdFeB永磁體和DP1180鋼的釬焊接頭，Cu在釬料中擴散并與Zn、Fe反應生成脆性金屬間化合物，導致釬縫中出現裂紋和孔洞。與無鍍層時的燒結NdFeB永磁體和DP1180鋼的釬焊接頭相比，接頭的剪切強度由61.9 MPa降低至52.3 MPa；對于鍍Ni的燒結NdFeB永磁體和DP1180鋼的釬焊接頭，Ni集中分布在NdFeB一側的界面處，并且由于Sn和Bi的擴散形成了不同的擴散層，其剪切強度提高至78.1 MPa。

    Abstract:

    Zn-6Sn-5Bi alloy was used to solder DP1180 steel and NdFeB permanent magnet coated with Cu and Ni, and the microstructures and mechanical properties of the soldered joints under different coating conditions were compared and analyzed. Results show that for the soldered joint of sintered NdFeB permanent magnet with Cu coating and DP1180 steel, Cu diffuses in the solder and reacts with Zn and Fe to form brittle intermetallic compounds, resulting in cracks and holes in the soldering seam. The shear strength of the soldered joint of sintered NdFeB permanent magnet with Cu coating and DP1180 steel decreases to 52.3 MPa, compared with that without Cu coating (61.9 MPa). For the soldered joint of sintered NdFeB permanent magnet with Ni coating and DP1180 steel, Ni is concentrated at the interface of NdFeB side, different diffusion layers are formed due to the diffusion of Sn and Bi, and the shear strength of soldered joint increases to 78.1 MPa.

    參考文獻
    相似文獻
    引證文獻
引用本文

蘇金龍,羅萃,阮野,邱小明,邢飛.鍍銅/鎳燒結釹鐵硼永磁體與DP1180鋼釬焊接頭的組織與性能[J].稀有金屬材料與工程,2024,53(2):365~370.[Su Jinlong, Luo Cui, Ruan Ye, Qiu Xiaoming, Xing Fei. Microstructure and Properties of Soldered Joints of Cu/Ni- Coated Sintered-NdFeB Permanent Magnets and DP1180 Steel[J]. Rare Metal Materials and Engineering,2024,53(2):365~370.]
DOI：10.12442/j. issn.1002-185X.20230514

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2023-08-21
  • 最后修改日期:2023-09-21
  • 錄用日期:2023-10-07
  • 在線發布日期: 2024-02-27
  • 出版日期: 2024-02-23