最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
鈦合金鑄錠尾部冶金質量影響因素研究
作者:
作者單位:

1.西北工業大學 凝固技術國家重點實驗室;2.西部超導材料科技股份有限公司

作者簡介:

通訊作者:

中圖分類號:

TG 146.2

基金項目:

陜西省重點研發計劃項目-工業領域(項目號2018ZDXM-GY-140)


Influence of start-up arc on metallurgical quality of titanium ingot’s back-end in VAR process
Author:
Affiliation:

1.State Key Laboratity of Solidification Processing,Northwestern Polytechnical University,Xi’an;2.Western Superconducting Technologies Co,Ltd,Xi’an

Fund Project:

Funded by the National key research and development program No.2018YFB1106000

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    本文采用數值模擬方法，通過從熔煉起弧階段的能量輸入（以及散熱）的角度分析影響鑄錠尾部冶金質量的關鍵因素，對第三次熔煉的起弧工藝參數進行研究，并通過實驗進行了驗證。結果表明，電流起弧后隨著熔煉的進行，鑄錠表面溫度逐漸升高，在熔煉至鑄錠30mm高度處，表面溫度達到最高。通過選擇合適時機提升起弧電流大小，加快電流上升速度，可以使熔池表面溫度明顯上升。Φ720mm規格TC17鈦合金第三次熔煉起弧電流增大4kA，1min快速升至大電流，大電流保持時間延長6min，能夠?qū)崿F(xiàn)熔池快速健全，達到穩定熔池時熔煉的金屬重量減少約一半，數值模擬和實驗結果的一致性吻合良好。

    Abstract:

    In this paper, the numerical simulation method is used to analyze the key factors affecting the metallurgical quality of the ingot back-end from the perspective of energy input ( and heat dissipation ) at the start-up stage during VAR process. The start up stage process parameters of the third smelting process are studied and verified by experiments. The results show that the surface temperature of the ingot gradually increases with the remelting time during the start-up stage, and the surface temperature reaches the highest at the height of 30 mm ingot. By controling the appropriate time to increase the arc current and accelerate the current rise rate, the surface temperature of the molten pool can be significantly increased. The arc current of Φ720mm TC17 titanium alloy increases by 4kA in the third remelting, and rapidly rises to a large current in 1min, then the holding time of the large current is extended by 6min, which can accelerat to bulid the molten pool, and the weight of the molten metal is reduced by about half. The numerical simulation and experimental results are in good agreement.

    參考文獻
    相似文獻
    引證文獻
引用本文

趙小花,王凱旋,王錦程,樓美琪,王陽陽,劉鵬,劉向宏.鈦合金鑄錠尾部冶金質量影響因素研究[J].稀有金屬材料與工程,2024,53(9):2565~2570.[Zhao Xiaohua, Wang Kaixuan, Wang Jincheng, Lou Meiqi, Wang Yangyang, Liu Peng, Liu Xianghong. Influence of start-up arc on metallurgical quality of titanium ingot’s back-end in VAR process[J]. Rare Metal Materials and Engineering,2024,53(9):2565~2570.]
DOI：10.12442/j. issn.1002-185X.20230457

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2023-07-23
  • 最后修改日期:2023-08-20
  • 錄用日期:2023-08-24
  • 在線發布日期: 2024-09-13
  • 出版日期: 2024-09-04