最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
SLM過程中飛濺形成機制和控制方法綜述
作者:
作者單位:

1.沈陽航空航天大學 機電工程學院;2.沈陽飛機工業集團有限公司

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家重點研發計劃項目(2022YFE0122600)；中央引導地方科技發展資金項目(2023JH6/100100044)


Review on the formation mechanism and control methods of spatter in SLM
Author:
Affiliation:

1.Shenyang Aerospace University;2.Shenyang Aircraft Corporation

Fund Project:

the National Key Research and Development Program of China (Grant No. 2022YFE0122600); the Central Guidance on Local Science and Technology Development Fund of Liaoning Province (Grant No. 2023JH6/100100044).

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    由于激光選區熔化(SLM)技術加工周期較短、易于成形結構復雜的零件,現已廣泛應用于生物醫療、航空航天、汽車和軍工制造業等領域。但是由于在成型過程中激光與粉末間復雜地相互作用,激光選區熔化制件的缺陷呈現出多樣化的特點,且控制難度加大,這在一定程度上限制了該技術的發展和應用。對于飛濺缺陷的形成機制和控制方法的研究,是近年來研究的熱點之一?？偨Y(jié)了近年來的相關研究成果,將粉末、熔池及成形層作為線索,從飛濺物對成形件的影響、飛濺物形成原因、監測和控制方法以及未來研究方向四部分闡述SLM過程中飛濺形成機制和控制方法,并展望了未來的發展方向。

    Abstract:

    Laser selective melting (SLM) technology has been widely used in biomedical, aerospace, automotive and military manufacturing industries because of its short processing cycle and easy to form parts with complex structure.SHowever, due to the complex interaction between laser and powder in the forming process, the defects of laser selective melting parts show diversified characteristics, and it is more difficult to control, which limits the development and application of this technology to a certain extent.SThe research on the formation mechanism and control methods of spatter defects is one of the research hotspots in recent years.SThis paper summarizes the relevant research achievements recently, taking powder, molten pool and forming layer as clues, expounds the spatter formation mechanism and control methods in the SLM process from four parts: the influence of spatter on formed parts, the cause of splash formation, the monitoring and control methods and the future research direction, and looks forward to the future development direction.

    參考文獻
    相似文獻
    引證文獻
引用本文

劉琦,楊光,殷俊,趙朔,安達. SLM過程中飛濺形成機制和控制方法綜述[J].稀有金屬材料與工程,2024,53(7):2094~2108.[Liu Qi, Yang Guang, Yin Jun, Zhao Shuo, An Da. Review on the formation mechanism and control methods of spatter in SLM[J]. Rare Metal Materials and Engineering,2024,53(7):2094~2108.]
DOI：10.12442/j. issn.1002-185X.20230301

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2023-05-18
  • 最后修改日期:2023-06-25
  • 錄用日期:2023-06-28
  • 在線發布日期: 2024-07-22
  • 出版日期: 2024-07-12