最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
鈦鋁異溫軋制溫度控制及復合性能研究
作者:
作者單位:

燕山大學

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金(52075472)、(52004242),國家重點研發計劃(2018YFA0707300),河北省自然科學基金(E2020203001)


Study on temperature control and composite properties of titanium and aluminum heterogeneous temperature rolling
Author:
Affiliation:

Yanshan University

Fund Project:

the National Natural Science Foundation of China（52075472、52004242)）; the National Key Research and Development Program(2018YFA0707300); the Natural Science Foundation of Hebei Province(E2020203001)

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    為實現鈦鋁異溫軋制鈦板電磁感應加熱時溫度分布更均勻,設計不同的感應加熱線圈組對鈦板進行加熱,使用有限元模擬了電磁感應加熱中感應線圈的結構參數對溫度場的影響,通過調節感應加熱參數將鈦板寬度方向溫差控制在50℃以內,形成較均勻的鈦板溫度。對鈦板進行感應加熱和測溫實驗,在較短時間的加熱時長下形成了平均溫度635℃,溫差45℃以內的鈦板溫度,驗證了仿真結果的正確性。對均勻性較好的高溫鈦板與室溫鋁合金板進行異溫軋制,制備出界面剪切強度為63.3MPa的鈦/鋁復合板,并對制備出的鈦/鋁復合板結合性能的分布受溫度均勻性的影響做了分析。

    Abstract:

    In order to achieve a more uniform temperature distribution during electromagnetic induction heating of titanium plate rolled at different temperature of titanium and aluminum, different induction heating coil sets are designed to heat the titanium plate, and the influence of the structural parameters of the induction coil on the temperature field in electromagnetic induction heating is simulated by using finite elements, and the temperature difference between the width of the titanium plate is controlled within 50 °C by adjusting the induction heating parameters to form a more uniform temperature of the titanium plate. The induction heating and temperature measurement experiments of the titanium plate were carried out, and the average temperature of the titanium plate was formed under a short heating time of 635 °C, and the temperature difference within 45 °C was formed, which verified the correctness of the simulation results. A titanium/aluminum composite plate with an interface shear strength of 63.3MPa was prepared by rolling the high-temperature titanium plate and the room-temperature aluminum alloy plate with good uniformity, and the distribution of the bonding performance of the prepared titanium/aluminum composite plate was analyzed by temperature uniformity.

    參考文獻
    相似文獻
    引證文獻
引用本文

余超,郭允暢,肖子涵,姜潤五,和志斌,肖宏.鈦鋁異溫軋制溫度控制及復合性能研究[J].稀有金屬材料與工程,2024,53(6):1693~1700.[YU Chao, GUO Yunchang, XIAO Zihan, JIANG Runwu, HE Zhibin, XIAO Hong. Study on temperature control and composite properties of titanium and aluminum heterogeneous temperature rolling[J]. Rare Metal Materials and Engineering,2024,53(6):1693~1700.]
DOI：10.12442/j. issn.1002-185X.20230222

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2023-04-19
  • 最后修改日期:2023-06-06
  • 錄用日期:2023-06-26
  • 在線發布日期: 2024-06-24
  • 出版日期: 2024-06-17