6C和M23C6+ matrix = M6C。合金在高溫拉伸應力下的斷裂機制為韌脆混合機制,塊狀初生碳化物與基體之間的界面容易成為裂紋萌生源。熱處理過程消除了容易引起晶界遷移的片層狀共晶M23C6,在骨架狀MC周圍析出了細小的M6C,同時改善了枝晶間元素偏析,促進基體中形成高密度的交疊層錯帶,使得合金在1000℃下的抗拉強度提高了約20MPa。"/>

最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
Co-Cr-Nb-W合金碳化物組織轉變及力學性能研究
作者:
作者單位:

1.鋼鐵研究總院 高溫材料研究所;2.北京鋼研高納科技股份有限公司;3.中國航發貴陽發動機設計研究所

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家重點研發計劃(項目號2022YFC3902002)


Carbides Evolution and Mechanical Behavior of Co-Cr-Nb-W Wear-resistance Alloy
Author:
Affiliation:

1.Central Iron and Steel Research Institute;2.Gaona Aero Material Co., Ltd.;3.AECC Guiyang Aero-Engine Research Institute

Fund Project:

National Key R&D Program of China

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    熱處理過程中的碳化物轉變對高溫合金的力學性能影響顯著。本實驗采用XRD、SEM、EPMA、TEM等技術研究了Co-Cr-Nb-W耐磨合金熱處理過程中碳化物的析出類型、分布特征、演變機理及其對高溫拉伸性能的影響。Co-Cr-Nb-W耐磨合金主要在釬焊和時效熱處理后使用,該過程中主要發生如下兩個碳化物轉變過程：MC + matrix = M6C和M23C6+ matrix = M6C。合金在高溫拉伸應力下的斷裂機制為韌脆混合機制,塊狀初生碳化物與基體之間的界面容易成為裂紋萌生源。熱處理過程消除了容易引起晶界遷移的片層狀共晶M23C6,在骨架狀MC周圍析出了細小的M6C,同時改善了枝晶間元素偏析,促進基體中形成高密度的交疊層錯帶,使得合金在1000℃下的抗拉強度提高了約20MPa。

    Abstract:

    Carbides transformation during heat-treatment process has a significant effect on the mechanical properties of superalloys. XRD, SEM, EPMA, and TEM were used to investigate the distribution and evolution mechanism of carbides and their effects on high-temperature tensile properties of Co-Cr-Nb-W wear-resistant alloy during heat-treatment process. There are two carbides transformation processes in the Co-Cr-Nb-W alloy during brazing simulation and aging: MC+matrix=M6C and M23C6+matrix=M6C. The fracture mechanism of the Co-Cr-Nb-W alloy under high temperature tensile stress is a hybrid mechanism of ductile fracture and brittle fracture, and the interface between the bulk primary carbide and the matrix is easy to become the source of crack source. The heat treatment process eliminates the lamellar M23C6 which is easy to cause grain boundary migration, induces the precipitation of fine M6C particles around the skeleton MC, improves the interdendritic element segregation, promotes the formation of high-density overlapping stacking fault (SF) bands in the matrix, and increases the tensile strength of the alloy at 1000℃ by about 20 MPa.

    參考文獻
    相似文獻
    引證文獻
引用本文

凌晨,李尚平,林筠,侯杰,李義平,駱合力. Co-Cr-Nb-W合金碳化物組織轉變及力學性能研究[J].稀有金屬材料與工程,2024,53(3):815~824.[LingChen, Li Shangping, Lin Jun, Hou Jie, Li Yiping, Luo Heli. Carbides Evolution and Mechanical Behavior of Co-Cr-Nb-W Wear-resistance Alloy[J]. Rare Metal Materials and Engineering,2024,53(3):815~824.]
DOI：10.12442/j. issn.1002-185X.20230133

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2023-03-15
  • 最后修改日期:2023-04-22
  • 錄用日期:2023-04-23
  • 在線發布日期: 2024-03-27
  • 出版日期: 2024-03-20