最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
高孔隙率微孔鎳的制備及性能
作者:
作者單位:

1.西北有色金屬研究院 金屬多孔材料國家重點實驗室，陜西 西安 710016;2.中國礦業大學 材料與物理學院，江蘇 徐州 221116;3.呂勒奧理工大學 材料科學部，瑞典 呂勒奧 97187

作者簡介:

通訊作者:

中圖分類號:

基金項目:

陜西省青年科技新星項目；國家自然科學基金項目


Preparation and Properties of Microporous Nickel with High Porosity
Author:
Affiliation:

1.State Key Laboratory of Porous Metal Materials, Northwest Institute for Nonferrous Metal Research, Xi'an 710016, China;2.School of Materials Science and Physics, University of Mining and Technology, Xuzhou 221116, China;3.Division of Materials Science, Lule? University of Technology, Lule? 97187, Sweden

Fund Project:

Science and Technology Department of Shaanxi Province (2021KJXX-75); National Natural Science Foundation of China (52020105011)

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    提出了一種燒結后閉孔加工再開孔的策略，通過粉末冶金方法和后續加工處理制備出了高孔隙率的微孔鎳材料。采用粒徑為1 μm的羰基鎳粉為原料，研究了燒結工藝參數對多孔鎳的孔隙性能和力學性能的影響。結果表明，在400 ℃燒結溫度下，壓汞法測得微孔鎳的孔隙率為53.7%，平均孔徑為612.25 nm。經加工處理后的壓汞孔隙率為54.0%，平均孔徑為511.37 nm，加工后孔隙結構仍符合應用要求，為多孔鎳及其他多孔金屬材料的制備開辟了一條新的途徑。

    Abstract:

    The strategy of sintered closed-hole followed by reopening was proposed to prepare the microporous nickel material with high porosity through the powder metallurgy and subsequential treatments. The carbonyl nickel powder with particle size of 1 μm was used as raw material, and the effects of sintering process parameters on the pore properties and mechanical properties of microporous nickel were studied. Results show that the porosity measured by mercury injection method of microporous nickel is 53.7%, and the average pore diameter is 612.25 nm at the sintering temperature of 400 °C. After machining, the porosity measured by mercury injec-tion method is 54.0%, and the average pore diameter is 511.37 nm, which still satisfies the requirements of engineering application. The strategy provides providing a new approach for the preparation of microporous nickel and other porous metal materials.

    參考文獻
    相似文獻
    引證文獻
引用本文

王昊,楊坤,王建忠,石英,馮培忠,黃愿平,荊鵬,Farid Akhtar.高孔隙率微孔鎳的制備及性能[J].稀有金屬材料與工程,2023,52(3):876~882.[Wang Hao, Yang Kun, Wang Jianzhong, Shi Ying, Feng Peizhong, Huang Yuanping, Jing Peng, Farid Akhtar. Preparation and Properties of Microporous Nickel with High Porosity[J]. Rare Metal Materials and Engineering,2023,52(3):876~882.]
DOI：10.12442/j. issn.1002-185X.20220495

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2022-06-08
  • 最后修改日期:2022-07-15
  • 錄用日期:2022-08-12
  • 在線發布日期: 2023-03-31
  • 出版日期: 2023-03-24