最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
2A97-T3鋁鋰合金激光焊接接頭微觀組織與織構的EBSD研究
作者:
作者單位:

1.北京工業大學 材料與制造學部，北京 100124;2.中國航空制造技術研究院，北京 100124;3.里爾大學 法國國家科學研究中心 國立農業、食品和環境研究所 中央理工大學，法國 里爾 F-59000

作者簡介:

通訊作者:

中圖分類號:

TG456.7

基金項目:

高能束流加工技術國防科技重點實驗室基金


Investigation on Microstructure and Microtexture of Laser-Welded 2A97-T3 Al-Li Alloys by EBSD
Author:
Affiliation:

1.Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing 100124, China;2.China Aeronautical Manufacturing Technology Research Institute, Beijing 100124, China;3.University Lille, CNRS, INRAE, Centrale Lille, Lille F-59000, France

Fund Project:

Supported by Project (614290801051809)

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    從2A97-T3鋁鋰合金激光焊接頭的上水平面、橫截面、縱截面和下水平面進行取樣，對接頭的微觀組織和織構進行了分析。利用電子背散射衍射（EBSD）技術的多種表征方法，如OIM、PF、IPF、取向角分布、ODF、晶粒形貌圖，并結合激光焊過程的數值模擬，研究了激光焊作用下接頭微觀組織的演變機理。結果表明，由于薄板冷軋工藝和激光焊加工的非平衡特性，導致接頭不同截面的晶粒形態、取向和微觀織構存在明顯差異。這種組織的不均勻性是接頭性能各向異性的根本來源。因此，有必要對接頭的不同截面進行分析，進而對微觀組織和織構獲得全面性和空間性的認識。激光誘導下，熱影響區發生了動態再結晶和亞結構晶粒的形成和長大，焊縫區則產生了微觀組織的重熔現象，該過程會導致母材原有織構特征在熱影響區減弱、在焊縫區消失。

    Abstract:

    The laser-welded 2A97-T3 aluminum-lithium (Al-Li) alloy joints were sampled from upper horizontal surface, transverse section, longitudinal section, and lower horizontal surface to develop the comprehensive and spatial understandings for microstructure and microtexture evolution. Various characterization methods in terms of electron backscattered diffraction such as orientation imaging microscopy, pole figure, inverse pole figure, misorientation angles distribution, orientation distribution function, and numerical simulation were used. The results show obvious differences in the grain morphology, orientation, and microtexture in different areas of the joint, due to the nonequilibrium characteristic of cold rolling and laser beam welding. The laser beam can induce the formation and growth of dynamic recrystallization and sub-structure grains in the heat affected zone. Moreover, the original microtexture characteristics of the base metal is weakened and thus eliminated in both the heat affected zone and the weld zone.

    參考文獻
    相似文獻
    引證文獻
引用本文

邵盈愷,李曉延,陳俐,嵇罡.2A97-T3鋁鋰合金激光焊接接頭微觀組織與織構的EBSD研究[J].稀有金屬材料與工程,2022,51(12):4464~4474.[Shao Yingkai, Li Xiaoyan, Chen Li, Ji Gang. Investigation on Microstructure and Microtexture of Laser-Welded 2A97-T3 Al-Li Alloys by EBSD[J]. Rare Metal Materials and Engineering,2022,51(12):4464~4474.]
DOI：10.12442/j. issn.1002-185X.20220074

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2022-01-24
  • 最后修改日期:2022-12-01
  • 錄用日期:2022-03-10
  • 在線發布日期: 2023-01-11
  • 出版日期: 2022-12-30