最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
硼對鑄態Al0.3CoCrFeNi高熵合金組織及性能的影響
作者:
作者單位:

1.上海理工大學 材料與化學學院;2.上海電機學院

作者簡介:

通訊作者:

中圖分類號:

TG146.1

基金項目:

上海市地方院校能力建設項目(21010500900)；上海大件熱制造工程技術研究中心(18DZ2253400)


Effect of Boron addition on microstructure and propertiesof as-cast Al0.3CoCrFeNi high entropy alloy
Author:
Affiliation:

1.School of Materials and Chemistry,University of Shanghai for Science and Technology;2.School of Materials engineering,Shanghai Dianji University

Fund Project:

1、Capacity building project of local colleges and universities of shanghai(No.2010500900) 2、Shanghai engineering research center of hot manufacturing,Shanghai Dianji University(No.18DZ2253400)

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    本文采用冷坩堝懸浮熔煉法制備了Al0.3CoCrFeNiBx (x=0,0.01,0.05,0.1)系列高熵合金。利用X射線衍射儀、電子背散射衍射分析、掃描電子顯微鏡及附帶的波譜儀分析了B的添加對Al0.3CoCrFeNi合金組織結構的影響,研究了Al0.3CoCrFeNiBx合金的顯微硬度、室溫摩擦磨損性能及室溫壓縮性能。結果表明：Al0.3CoCrFeNi合金為FCC結構,隨著B(niǎo)含量的增加,FCC相基體中晶界處Cr2B析出相逐漸增多,且Cr2B相由顆粒狀分布逐漸轉變?yōu)檫B續網狀分布,致使合金的硬度、耐磨性和屈服強度均逐漸提高?？梢?jiàn),Cr2B析出相彌散強化作用顯著,Al0.3CoCrFeNiB0.1綜合性能更佳。

    Abstract:

    Al0.3CoCrFeNiBx(x= 0,0.01, 0.05, 0.1) high entropy alloys were fabricated by cold crucible levitation melting. The effect of addition of B on the microstructures of Al0.3CoCrFeNiBxalloys were studied using X-ray diffraction, electron backscatter diffraction, scanning electron microscopy with wavelength dispersive X-ray spectroscopy. The microhardness, friction and wear properties and compression properties of Al0.3CoCrFeNiBxalloys at room temperature were analyzed. The results show that Al0.3CoCrFeNi alloy is FCC structure. With increasing B content, the Cr2B precipitated phase increases gradually at the grain boundaries of FCC phase matrix, and the Cr2B phase gradually changes from granular distribution to continuous network distribution, resulting in the alloy microhardness, wear resistance and yield strength are gradually improved. It can be seen that the precipitation of Cr2B has significant dispersion strengthening effect, and the comprehensive performance of Al0.3CoCrFeNiB0.1is better.

    參考文獻
    相似文獻
    引證文獻
引用本文

李榮斌,鄒傳樂,張志璽,張如林,彭望君.硼對鑄態Al0.3CoCrFeNi高熵合金組織及性能的影響[J].稀有金屬材料與工程,2023,52(2):667~674.[Li Rongbin, Zou Chuanle, Zhang Zhixi, Zhang Rulin, Peng Wangjun. Effect of Boron addition on microstructure and propertiesof as-cast Al0.3CoCrFeNi high entropy alloy[J]. Rare Metal Materials and Engineering,2023,52(2):667~674.]
DOI：10.12442/j. issn.1002-185X.20220057

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2022-01-20
  • 最后修改日期:2022-02-09
  • 錄用日期:2022-02-24
  • 在線發布日期: 2023-03-09
  • 出版日期: 2023-02-28