最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
電子束選區熔化增材制造TiAl合金的高溫硬度及氧化行為研究
作者:
作者單位:

1.廣東工業大學材料與能源學院;2.廣東省科學院新材料研究所現代表面工程技術國家重點實驗室

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金(52005113),廣東特支計劃(2019BT02C629),中國博士后科學基金資助項目(2021T140140),廣東省重點領域研發計劃(2020B090923002),廣州市重點領域研發計劃(202102020327),廣東省現代表面工程技術重點實驗室(2020B1212060049),廣東省科學院實施創新驅動發展能力建設專項資金項目(2020GDASYL-20200103112,2021GDASYL-20210302005)


High temperature hardness and oxidation behavior of TiAl alloy fabricated by electron beam selective melting additive
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    鈦鋁合金是航空航天領域具有廣闊應用前景的輕質高溫合金，電子束選區熔化（EBM）增材制造技術是制備復雜結構TiAl合金有效途徑，但目前對其高溫性能研究較少。本文重點研究了電子束選區熔化增材制造Ti-48Al-2Cr-2Nb合金的顯微組織、高溫硬度及其高溫氧化行為。結果表明，EBM成形Ti-48Al-2Cr-2Nb合金呈現出由等軸γ晶粒和雙相區組成的獨特層狀組織；在800 ℃下恒溫氧化100 h，表現出較低的氧化速率常數，形成的氧化膜主要由TiO2、Al2O3及TiO2 / Al2O3混合交替層組成，抗氧化性能優于傳統方法制備的Ti-48Al-2Cr-2Nb合金和其他TiAl合金。此外，900℃以下，該合金具有良好的高溫硬度，顯微硬度隨溫度的升高未發生明顯的下降趨勢。

    Abstract:

    TiAl alloy is a lightweight superalloy with broad application prospects in aerospace field. Electron beam selective melting(EBM) additive manufacturing technology is an effective way to prepare TiAl alloy with complex structure. However, there are few studies on high temperature properties of TiAl alloy. In this paper, the microstructure, high-temperature hardness and high-temperature oxidation behavior of Ti-48Al-2Cr-2Nb alloy fabricated by electron beam selective melting additive are mainly studied. The results show that the Ti-48Al-2Cr-2Nb alloy formed by EBM exhibits a unique layered structure composed of equiaxed γ grains and double phase regions. After isothermal oxidation at 800 °C for 100 h, this alloy shows a low oxidation rate constant, and the formed oxide film is mainly composed of TiO2, Al2O3 and TiO2 / Al2O3 mixed alternating layers. The oxidation resistance is better than that of Ti-48Al-2Cr-2Nb alloy and other TiAl alloy prepared by traditional methods. In addition, this alloy has good high temperature hardness at below 900 ℃, and the microhardness does not decrease significantly with the increase of temperature.

    參考文獻
    相似文獻
    引證文獻
引用本文

譚宇璐,張艷梅,盧冰文,閆星辰,李艷輝,代明江,劉敏.電子束選區熔化增材制造TiAl合金的高溫硬度及氧化行為研究[J].稀有金屬材料與工程,2023,52(1):222~229.[tan yulu, zhang yanmei, lu bingwen, yan xingchen, li yanhui, dai mingjiang, liu min. High temperature hardness and oxidation behavior of TiAl alloy fabricated by electron beam selective melting additive[J]. Rare Metal Materials and Engineering,2023,52(1):222~229.]
DOI：10.12442/j. issn.1002-185X.20211090

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2021-12-09
  • 最后修改日期:2022-01-21
  • 錄用日期:2022-02-09
  • 在線發布日期: 2023-02-13
  • 出版日期: 2023-02-08