最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
(Zr0.55Cu0.3Al0.1Ni0.05)98Er2非晶合金制備及其晶化動力學行為
作者:
作者單位:

蘭州理工大學

作者簡介:

通訊作者:

中圖分類號:

TG139

基金項目:

國家自然科學基金項目（面上項目，重點項目，重大項目）


Ding Ruixian1,2, Kou Shengzhong1,2, Li Xiaocheng1,2, Fan Jianjun1,2, Fu Xiaoqiang1,2,Jiang Xilai1,2, Li Chunling3,Li Chunyan1,2
Author:
Affiliation:

Lanzhou University of Technology

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    利用銅模吸鑄法制備直徑為6 mm的(Zr0.55Cu0.3Al0.1Ni0.05)98Er2非晶合金試棒，探究在過冷液相區等溫溫度和時間對其熱穩定性的影響以及采用連續加熱和等溫加熱研究其晶化動力學行為。結果表明：隨等溫?zé)崽幚頊囟鹊纳撸?Zr0.55Cu0.3Al0.1Ni0.05)98Er2非晶合金出現晶化現象的等溫?zé)崽幚頃r間越短；根據Kissinger方程得出該非晶合金的晶化激活能Ex為337.39 KJ/mol；兩種實驗方法所得的實驗數據非常接近，可為相互印證。對于(Zr0.55Cu0.3Al0.1Ni0.05)98Er2非晶合金進行超塑性成型來說；超塑性成型加熱參數同時位于兩條TTT曲線的右下方時，更有利于其超塑性的成型和得到具有單一非晶相的成型件。

    Abstract:

    The (Zr0.55Cu0.3Al0.1Ni0.05)98Er2 amorphous alloy bars with diameter of 6 mm were prepared by copper mold suction casting method. The effects of isothermal temperature and time on the thermal stability in supercooled liquid region were investigated, and the crystallization kinetics behavior was studied by continuous heating and isothermal heating.The results show that with the increase of isothermal heat treatment temperature, the isothermal heat treatment time of (Zr0.55Cu0.3Al0.1Ni0.05)98Er2 amorphous alloy is shorter; According to Kissinger equation, the activation energy Ex of the amorphous alloy is 337.39 kJ/mol; The experimental data obtained by the two methods are very close, which can be proved by each other.

    參考文獻
    相似文獻
    引證文獻
引用本文

丁瑞鮮,寇生中,李曉誠,樊建軍,付小強,蔣希來,李春玲,李春燕.(Zr0.55Cu0.3Al0.1Ni0.05)98Er2非晶合金制備及其晶化動力學行為[J].稀有金屬材料與工程,2022,51(6):2258~2266.[Ding Ruixian, Kou Shengzhong, Li Xiaocheng, Fan Jianjun, Fu Xiaoqiang, Jiang Xilai, Li Chunling, Li chunyan. Ding Ruixian1,2, Kou Shengzhong1,2, Li Xiaocheng1,2, Fan Jianjun1,2, Fu Xiaoqiang1,2,Jiang Xilai1,2, Li Chunling3,Li Chunyan1,2[J]. Rare Metal Materials and Engineering,2022,51(6):2258~2266.]
DOI：10.12442/j. issn.1002-185X.20210463

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2021-05-23
  • 最后修改日期:2021-06-18
  • 錄用日期:2021-07-12
  • 在線發布日期: 2022-07-06
  • 出版日期: 2022-06-29