最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
原始晶粒尺寸對ECAP變形純鈦組織性能的影響
作者:
作者單位:

西安建筑科技大學 冶金工程學院,陜西 西安 710055

作者簡介:

通訊作者:

中圖分類號:

TG146.4

基金項目:

國家自然科學基金項目(面上項目,重點項目,重大項目);陜西省教育廳重點實驗室項目


Effects of Initial Grain Size on Microstructure and Properties of Pure Ti Processed by ECAP
Author:
Affiliation:

School of Metallurgical Engineering, Xi 'an University of Architecture and Technology, Xi 'an 710055, China

Fund Project:

National Natural Science Foundation of China (51474170); Key Laboratory Project of Shaanxi Provincial Department of Education (20JS075)

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    室溫下,對923 及1023 K退火1 h所得的不同原始晶粒尺寸的工業純鈦進行ECAP變形。通過TEM、EBSD、室溫拉伸和顯微硬度測試研究原始晶粒尺寸對ECAP變形純鈦組織性能的影響。探討純鈦ECAP變形孿生行為和變形機制。結果表明,退火溫度越高,原始晶粒尺寸越大。1道次變形后,1023 K退火純鈦的晶粒細化效果更顯著。4道次變形后,923 K退火純鈦的組織更細小均勻。隨著變形道次的增加,屈服強度不斷增大,1道次變形后增幅最大,約為100%,且原始晶粒尺寸越大,強度增幅越大。純鈦ECAP變形機制包括位錯滑移和孿生,原始晶粒尺寸越大,孿晶數量越多。

    Abstract:

    The pure Ti with different initial grain sizes which was annealed at 923 and 1023 K for 1 h was processed by ECAP at room temperature. The influence of initial grain size on microstructure and properties of ECAPed pure Ti was investigated by TEM, EBSD, tensile tests and microhardness tests at room temperature. The twinning behavior and deformation mechanism of pure Ti were also discussed during the ECAP. The results show that the initial grain size of pure Ti increases with increasing the annealing temperature. The grain refinement effect of pure Ti annealed at 1023 K is more significant than that of pure Ti annealed at 923 K after 1 pass of ECAP, while the microstructure of pure Ti annealed at 923 K is finer and more uniform than that of pure Ti annealed at 1023 K after 4 passes of ECAP. With the increase of ECAP pass, the yield stress increases, especially after 1 pass with more than 100% implication. The larger the initial grain size, the greater the stress increase. The deformation mechanisms of pure Ti during the ECAP include dislocation slips and deformation twinning, and with the increase of the initial grain size, the number of twins increases.

    參考文獻
    相似文獻
    引證文獻
引用本文

強萌,楊西榮,劉曉燕,羅雷.原始晶粒尺寸對ECAP變形純鈦組織性能的影響[J].稀有金屬材料與工程,2022,51(6):1949~1956.[Qiang Meng, Yang Xirong, Liu Xiaoyan, Luo Lei. Effects of Initial Grain Size on Microstructure and Properties of Pure Ti Processed by ECAP[J]. Rare Metal Materials and Engineering,2022,51(6):1949~1956.]
DOI:10.12442/j. issn.1002-185X.20210279

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2021-04-01
  • 最后修改日期:2022-06-10
  • 錄用日期:2021-05-24
  • 在線發布日期: 2022-06-29
  • 出版日期: 2022-06-29