最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
合金元素及孔結構對Gasar鎂合金力學性能及腐蝕性能的影響
作者:
作者單位:

清華大學 材料學院

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金資助(項目號51771101)


Effects of alloying element and pore structure on mechanical property and corrosion properties of Gasar Mg Alloy
Author:
Affiliation:

School of Materials Science and Engineering,Tsinghua University

Fund Project:

The National Natural Science Foundation of China

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    采用金屬-氣體共晶定向凝固法(常稱為Gasar工藝)成功制備藕狀多孔Mg-Mn、Mg-Mn-Zn系合金,并研究合金元素及孔結構對藕狀多孔鎂合金力學性能及腐蝕性能的影響。研究結果表明：1wt.%Mn的添加,可以使藕狀多孔純鎂的壓縮強度從64MPa (孔隙率~36%)提升至74MPa (孔隙率~37%),而進一步添加1wt.%的Zn元素,材料的壓縮強度增至115MPa (孔隙率~37%)。Zn 元素的加入可以提高藕狀多孔 Mg-Mn合金的耐腐蝕性能,同時,藕狀多孔Mg-1wt.%Mn-1wt.%Zn合金定向孔下方的圓錐狀溶質富集區表現出良好的耐腐蝕性?？讖綄?duì)藕狀多孔材料腐蝕性能有一定的影響,當孔徑尺寸為1026μm時,Gasar Mg-1wt.%Mn合金孔壁腐蝕較為嚴重,而當孔徑降至306μm時,孔會被腐蝕產物封閉,孔壁的腐蝕程度較小。

    Abstract:

    In this paper, lotus-type porous Mg-Mn and Mg-Mn-Zn alloys were fabricated successfully by metal-gas eutectic unidirectional solidification (the Gasar method). Effects of elements on the mechanical properties and corrosion properties of porous Mg alloy was studied. The results showed that the addition of 1 wt.% Mn could increase the compressive strength of pure Mg from 64 MPa (porosity~36%) to 74 MPa (porosity~37%), and the compressive strength of the porous material could be increased to 115 MPa (porosity~37%) by adding 1 wt.% Zn to Mg- wt.% Mn alloy. Addition of Zn can effectively improve the corrosion resistance of Gasar Mg-Mn alloy. Conical solute enrichment area near the pore bottom of Gasar Mg-1wt.%Mn-1wt.%Zn alloy showed good corrosion resistance. Pore structure can affect the corrosion resistance of Gasar materials. When the average pore diameter was 1026 μ m, the corrosion of the pore wall in Mg-1wt.%Mn alloy was more serious. While the average pore diameter was decreased to 306 μ m, the pore of the samples would be blocked by corrosion products, and the corrosion of pore walls was less.

    參考文獻
    相似文獻
    引證文獻
引用本文

周燦旭,劉源.合金元素及孔結構對Gasar鎂合金力學性能及腐蝕性能的影響[J].稀有金屬材料與工程,2022,51(2):637~644.[Canxu Zhou, Yuan Liu. Effects of alloying element and pore structure on mechanical property and corrosion properties of Gasar Mg Alloy[J]. Rare Metal Materials and Engineering,2022,51(2):637~644.]
DOI：10.12442/j. issn.1002-185X.20210133

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2021-02-18
  • 最后修改日期:2021-04-23
  • 錄用日期:2021-05-12
  • 在線發布日期: 2022-03-09
  • 出版日期: 2022-02-28