最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
Ti/Al合金化對U-5.5Mo合金組織與力學性能的影響
作者:
作者單位:

1.中國工程物理研究院材料研究所;2.西北工業大學材料學院

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家重點研發計劃(項目號2016YFB0701201)


Effect of Ti / Al Alloying on Microstructure and Mechanical Properties of U-5.5Mo Alloy
Author:
Affiliation:

1.Institute of Materials, China Academy of Engineering Physics;2.School of Materials Science and Engineering,Northwestern Polytechnical University,Xi’an;3.Institute of Materials,China Academy of Engineering Physics

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    采用感應熔煉法在U-5.5Mo合金中引入Ti/Al元素,通過淬火與時效熱處理來調控材料的組織與性能,獲得不同熱處理狀態下的U-Mo-Ti/Al合金的微結構與性能。并分析析出相的組成、分布與性能的關系,探討Ti/Al合金元素對U-5.5Mo合金力學性能的調控機制。發現在U-5.5Mo合金中加入微量Ti元素對U-Mo合金有明顯固溶強化效果,使合金強度大幅提升；低溫時效熱處理可大幅提升U-Mo-Ti三元合金的力學性能；添加微量Al元素,促使U-Mo-Ti-Al四元合金中形成高溫穩定的富鈦與富鋁的多元復合金屬間化合物,其在基體與晶界上呈大量不規則連續分布,對合金具有顯著沉淀強化效果,使U-Mo-Ti-Al四元合金的強度大幅提升,而塑性幾乎降為零。

    Abstract:

    An experimental set-up was designed for measuring the self-field losses of Bi2223/Ag HTS tapes using a transport current method. Ti/Al was introduced into U-5.5Mo alloy by induction melting, and a new alloy U-Mo-Ti/Al is obtained in this way, its microstructures and properties are controlled by quenching and heat treatment of aging. The relationship between the composition, distribution and properties of precipitates was analyzed, the effect of Ti/Al alloy elements on the mechanical properties of U-5.5Mo alloy was investigated as well. It is found that added trace element Ti has obvious effect of solution strengthening on the alloy of U-5.5Mo. The mechanical properties of U-Mo-Ti ternary alloy can be greatly improved by low temperature aging. It can promote the formation of stable multi-component intermetallic compounds rich in titanium and aluminum in U-Mo-Ti-Al quaternary alloy under high temperature by adding trace element Al, multitudes of irregular continuous distribution of the trace element in the matrix and grain boundary have significant precipitation strengthening effect on the alloy, as a result, the strengthen of U-Mo-Ti-Al quaternary alloy is greatly improved while the plasticity almost decreases to zero.

    參考文獻
    相似文獻
    引證文獻
引用本文

王震宏,張立同,陳冬,鄧鴻章. Ti/Al合金化對U-5.5Mo合金組織與力學性能的影響[J].稀有金屬材料與工程,2021,50(8):2807~2814.[Wang Zhenhong, Zhang Litong, Chen Dong, Deng Hongzhang. Effect of Ti / Al Alloying on Microstructure and Mechanical Properties of U-5.5Mo Alloy[J]. Rare Metal Materials and Engineering,2021,50(8):2807~2814.]
DOI：10.12442/j. issn.1002-185X.20200666

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2020-09-03
  • 最后修改日期:2020-12-06
  • 錄用日期:2020-12-22
  • 在線發布日期: 2021-09-07
  • 出版日期: 2021-08-31