最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
熱處理對粉末冶金Inconel 718高溫合金組織及性能的影響
作者:
作者單位:

1.西北工業大學 凝固技術國家重點實驗室;2.西安歐中材料科技有限公司

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家重點研發計劃(2018YFB1106400),陜西省重點研發計劃項目(2018ZKC-093,2019GY-172)


Effect of heat treatment on the microstructure and mechanical propertiesof P/M Inconel 718 superalloy
Author:
Affiliation:

1.State Key Laboratory of Solidification Processing,Northwestern Polytechnical University,Xi’an;2.Sino-Euro Materials Technologies of Xi’an Co,Ltd,Xi’an

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    本文以超高轉速等離子旋轉電極法（SS-PREP法）制備的高球形度Inconel 718高溫合金粉末為原料，采用熱等靜壓（HIP）工藝制備了Inconel 718高溫合金粉末高溫合金，重點研究了熱處理制度對合金組織和力學性能的影響。實驗結果表明：采用SS-PREP法制得的Inconel 718高溫合金粉末粒度分布均勻，球形度良好，具有優異的HIP工藝性能；隨著固溶溫度的增加，合金晶界逐漸變淺，說明晶界析出相數量逐漸減少。時效熱處理后，沿晶界析出大量針狀δ相，同時還有少量MC碳化物相。在1210℃、120MPa條件下保溫保壓4h的HIP工藝下，經不同固溶溫度熱處理后，合金室溫抗拉強度可達1404MPa，650℃高溫抗拉強度為1150MPa，980℃下合金綜合性能較好。

    Abstract:

    Powder metallurgy (P/M) Inconel 718 superalloy was processed through hot isostatic pressing (HIP) route by SS-PREP powder. Effect of heat treatment on the microstructure and mechanical properties of superalloy was research. The results indicated that the distribution of size of Inconel 718 superalloy SS-PREP powder uniformity, with the fine degree of sphericity. HIP at 1210℃/120MPa for 4h, average size of grain was 50μm, tensile strength at room temperature was 1260MPa. Tensile strength at room temperature achieve to 1404MPa through solution treatment at different temperatures and two-step ageing treatment, and Tensile strength at 650℃ achieve to 1150MPa. Optimum properties of Inconel 718 superalloy appears when solution treatment at 980℃.

    參考文獻
    相似文獻
    引證文獻
引用本文

韓志宇,張平祥,宋嘉明,王慶相,梁書錦,唐斌,賴運金.熱處理對粉末冶金Inconel 718高溫合金組織及性能的影響[J].稀有金屬材料與工程,2021,50(2):693~698.[Han Zhiyu, Zhang Pingxiang, Song Jiaming, Wang Qingxiang, Liang Shujin, Tang Bin, Lai Yunjin. Effect of heat treatment on the microstructure and mechanical propertiesof P/M Inconel 718 superalloy[J]. Rare Metal Materials and Engineering,2021,50(2):693~698.]
DOI：10.12442/j. issn.1002-185X.20200421

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2020-06-15
  • 最后修改日期:2020-08-10
  • 錄用日期:2020-08-28
  • 在線發布日期: 2021-03-09
  • 出版日期: