-1和真應變0.51條件下的流變曲線,通過考慮摩擦和溫升效應對流動應力的影響,對Ti60合金實測流變曲線進行修正。結果表明,摩擦和溫升效應對Ti60合金流動應力均具有較顯著的影響,且摩擦效應隨著應變的增加而增加,而溫升效應隨著變形溫度的降低和應變速率的升高而增加。經摩擦和溫升修正后的流變曲線接近于流動穩態型,它能更準確地反映Ti60合金在等溫恒應變速率條件下的流動應力對真應變的動態響應。"/>

最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
考慮摩擦和溫升效應的Ti60合金流變曲線修正
作者:
作者單位:

南昌航空大學

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金資助(51964034, 51761029)江西省研究生創新基金(YC2018-S365)


Correction of the flow curve of Ti60 alloy considering effectsof friction and heating
Author:
Affiliation:

1.Nanchang Hangkong University,Nan,chang,330063;2.China

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    采用Thermecmaster-Z型熱加工模擬試驗機對Ti60合金進行等溫恒應變速率壓縮實驗,獲得該合金在變形溫度700～950℃,應變速率0.001～10s-1和真應變0.51條件下的流變曲線,通過考慮摩擦和溫升效應對流動應力的影響,對Ti60合金實測流變曲線進行修正。結果表明,摩擦和溫升效應對Ti60合金流動應力均具有較顯著的影響,且摩擦效應隨著應變的增加而增加,而溫升效應隨著變形溫度的降低和應變速率的升高而增加。經摩擦和溫升修正后的流變曲線接近于流動穩態型,它能更準確地反映Ti60合金在等溫恒應變速率條件下的流動應力對真應變的動態響應。

    Abstract:

    Thermecmaster-Z thermal processing simulation machine was used to conduct isothermal compression tests on Ti60 alloy, and the flow curves of the alloy were obtained under the conditions of deformation temperature 700 ~ 950℃, strain rate 0.001 ~ 10s-1 and true strain 0.51. The flow curves of Ti60 alloy were corrected by considering the effect of friction and heating on flow stress.The results show that the effectof friction and heatinghas significant influence on the flow stress of Ti60 alloy.The influence of friction increases with the increase of strain, while the influence of heating increases with the decrease of deformation temperature and the increase of strain rate. The flow curve presents flow steady typeafter correctingby the effect of friction and heating,which can more accurately reflect the dynamic response of the flow stress of Ti60 alloy to the true strain.

    參考文獻
    相似文獻
    引證文獻
引用本文

王天祥,魯世強,王克魯,歐陽德來,姚泉.考慮摩擦和溫升效應的Ti60合金流變曲線修正[J].稀有金屬材料與工程,2021,50(2):537~543.[Wang Tianxiang, Lu Shiqiang, Wang Kelu, Ouyang Delai, Yao Quan. Correction of the flow curve of Ti60 alloy considering effectsof friction and heating[J]. Rare Metal Materials and Engineering,2021,50(2):537~543.]
DOI：10.12442/j. issn.1002-185X.20200128

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2020-02-27
  • 最后修改日期:2020-02-27
  • 錄用日期:2020-04-18
  • 在線發布日期: 2021-03-09
  • 出版日期: