3;合金的維氏顯微硬度約380,屈服強度σ0.2=650MPa,壓縮變形率達到60%以上,合金的強化機制為固溶強化。"/>

最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
TiZrHfNbSc難熔高熵合金組織和力學性能研究
作者:
作者單位:

1有研工程技術研究院有限公司稀有金屬冶金材料研究所

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家科技部中俄國際合作專項項(2010DFR50800)


Microstructure and Mechanical Properties of TiZrHfNbSc Refractory High Entropy Alloy
Author:
Affiliation:

Rare Metal and Metallurgy Materials Research Institute,GRIMAT Engineering Institute Co.,Ltd

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    利用真空電弧熔煉設備制備了新型TiZrHfNbSc難熔高熵合金,利用XRD、SEM、DSC等方法分析了合金的顯微組織,利用顯微硬度計、微控電子萬能試驗機測定了合金的硬度及力學性能。研究結果表明:TiZrHfNbSc難熔高熵合金為單一無序的BCC固溶體結構,晶格常數a=3.443?,合金密度約為7.16g/cm3;合金的維氏顯微硬度約380,屈服強度σ0.2=650MPa,壓縮變形率達到60%以上,合金的強化機制為固溶強化。

    Abstract:

    The new TiZrHfNbSc refractory high-entropy alloy was prepared by vacuum arc melting with argon shield. The microstructure were studied by XRD, SEM and DSC, the hardness and mechanical properties were measured by vickers microhardness tester and micro-control electronic universal testing machine. The results showed that the TiZrHfNbSc refractory high-entropy alloy had a single disordered BCC solid solution structure with the lattice parameter a=3.443? .The alloy density was 7.16 g/cm3 and the Vickers microhardness was 380. The alloy had high compression yield strength(σ0. 2=650MPa) and the compression deformation rate is more than 60%.The strengthening mechanism of the alloy is solid solution strengthening.

    參考文獻
    相似文獻
    引證文獻
引用本文

江洪林,胡志方,袁學韜,尹延西. TiZrHfNbSc難熔高熵合金組織和力學性能研究[J].稀有金屬材料與工程,2020,49(8):2820~2824.[Jiang Honglin, Hu Zhifang, Yuan Xuetao, YinYanxi. Microstructure and Mechanical Properties of TiZrHfNbSc Refractory High Entropy Alloy[J]. Rare Metal Materials and Engineering,2020,49(8):2820~2824.]
DOI:10.12442/j. issn.1002-185X.20190617

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2019-07-24
  • 最后修改日期:2019-10-08
  • 錄用日期:2019-10-11
  • 在線發布日期: 2020-09-27
  • 出版日期: