最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
基底表面質量對ZK60鎂合金鍍鎳層性能的影響
作者:
作者單位:

1.西北工業大學凝固技術國家重點實驗室;2.西安空間無線電技術研究所

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家重點研發計劃(2018YFB1106800)；國家自然科學基金資助(51420105005,51771152)；寧夏“十三五”重大科技項目(2018BCE01001)


Effect of Substrate Surface Quality on Nickel Plating Property of ZK60 Magnesium Alloy
Author:
Affiliation:

1.State Key Laboratory of Solidification Processing,Northwestern Polytechnical University,Xi’an;2.Xi’an Institute of Space Radio Technology,Xi’an

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    鎂合金表面鍍鎳被廣泛運用于鎂合金工件防腐,而鍍層的起泡和脫落嚴重影響工件的使用壽命。本文以ZK60鎂合金為對象,研究了不同工件基底表面質量對鍍鎳層的影響機制。研究表明：基底表面存在的劃痕和點蝕坑會顯著降低鍍鎳層質量,引起鍍層的起泡和脫落?；妆砻娴膭澓蹠?huì)被保留到鍍鎳層中,引發鍍層變薄,應力集中等問題,增加鍍層開裂的幾率。點蝕坑中的雜質與鎂基底有不同的電化學特性,會導致鍍層減薄和結合不牢。因此,提高鎂合金工件基底表面光潔度、清除基底表面點蝕坑是提高鎂合金鍍鎳層性能的必要措施。

    Abstract:

    Nickel plating on the surface of magnesium alloy is widely used in the anti-corrosion of magnesium alloy workpiece, but blistering and peeling from nickel plating will seriously affect service life of the workpiece. In this paper, effects of the different substrate surfaces on nickel plating properties of ZK60 magnesium alloy were studied. The results showed that the surface scratch and corrosive pitting significantly reduced the coating quality and caused blistering and peeling from nickel plating. The surface scratch of the substrate was retained under the nickel plating layer, which made the coating thinner, and caused stress concentration in the coating, and increased the probability of coating cracking. Differences in electrochemical properties between impurities in pitting pits and magnesium substrate led to thinning of the coating and weakened the adhesion of the coating. Therefore, good substrate surface finish and no substrate surface corrosive pitting are the guarantee of high quality nickel plating of magnesium alloy workpiece.

    參考文獻
    相似文獻
    引證文獻
引用本文

鄭循威,楊光昱,黃光孫,田普科,羅時峰,介萬奇.基底表面質量對ZK60鎂合金鍍鎳層性能的影響[J].稀有金屬材料與工程,2020,49(6):2161~2167.[Zheng Xunwei, Yang Guangyu, Huang Guangsun, Tian Puke, Luo Shifeng, Jie Wanqi. Effect of Substrate Surface Quality on Nickel Plating Property of ZK60 Magnesium Alloy[J]. Rare Metal Materials and Engineering,2020,49(6):2161~2167.]
DOI：10.12442/j. issn.1002-185X.20190325

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2019-04-15
  • 最后修改日期:2019-06-21
  • 錄用日期:2019-07-02
  • 在線發布日期: 2020-07-09
  • 出版日期: