最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
摩托車發動機用Ti-Al-Fe-Mo氣門的制備及性能表征
作者:
作者單位:

1.廣東省科學院 廣東省材料與加工研究所;2.中南大學;3.江門天釔金屬工業有限公司

作者簡介:

通訊作者:

中圖分類號:

TF12；TG146.2

基金項目:

國家自然科學基金資助(51404077)；廣州市對外科技合作專項(201508030032)；廣東省自然科學基金 (2015A030313775)；廣東省科學院實施創新驅動發展能力建設專項(2017GDASCX-0117、2018GDASCX-0117)；廣東省公益研究與能力建設專項(2017A070702019)；廣州市科技計劃項目(ZWY201704003)；廣東省材料與加工研究所創新能力建設項目(2017A070701029)


Preparation and properties characterization of Ti-Al-Fe-Mo valves for motorcycle engines
Author:
Affiliation:

1.Institute for Materials and Processes of Guangdong Province,Guangdong Academy of Sciences;2.Jiangmen TYAN Metal Industry Company Limited

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    以Ti粉和Al、Fe、Mo等元素粉末為原料,采用粉末冶金工藝制備了Ti-Al-Fe-Mo合金,并最終制成摩托車發動機用鈦氣門,研究了鈦合金制備過程中的組織和性能演變規律,考察了鈦氣門的裝機試驗使用效果。結果表明,采用粉末冶金工藝制備的Ti-Al-Fe-Mo合金具有優良的綜合性能,其抗拉強度為1232 MPa,屈服強度為1186 MPa,延伸率為6.5 %,硬度為49 HRC。在鈦合金表面涂覆TiN硬質耐磨涂層后,制成的鈦氣門可滿足摩托車發動機的裝機測試要求。與使用鋼制氣門相比,使用鈦氣門可以使發動機的功率和扭矩提高約12%,油耗降低1%,并顯著降低噪音。

    Abstract:

    Ti-Al-Fe-Mo alloy was prepared by powder metallurgy method with titanium, aluminum, molybdenum and iron powders used as raw materials, and the alloy was used to fabricate valves for motorcycle engines. The microstructure as well as performance evolution of the alloy during the preparing process was investigated. The performances of motorcycle engines assembled with Ti valves were also tested. The results show that Ti-Al-Fe-Mo alloy prepared by powder metallurgy has excellent comprehensive performances with ultimate tensile strength 1232 MPa, yield strength 1186 MPa, elongation 6.5% and hardness 49 HRC. The fabricated valves after coating TiN can meet the requirement of on board tests of the motorcycle engine. Compared with assembling steel valves, power and torque of the motorcycle engines assembled with Ti valves are improved by about 12%, fuel consumption rate is reduced by 1% and the noise is also significantly lowered.

    參考文獻
    相似文獻
    引證文獻
引用本文

陳峰,閆志巧,許榮君,劉彬,林國亮.摩托車發動機用Ti-Al-Fe-Mo氣門的制備及性能表征[J].稀有金屬材料與工程,2019,48(10):3297~3301.[Chen Feng, Yan Zhiqiao, Xu Rongjun, Liu Bin, Lin Guoliang. Preparation and properties characterization of Ti-Al-Fe-Mo valves for motorcycle engines[J]. Rare Metal Materials and Engineering,2019,48(10):3297~3301.]
DOI：10.12442/j. issn.1002-185X.20180810

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2018-07-26
  • 最后修改日期:2018-08-17
  • 錄用日期:2018-10-08
  • 在線發布日期: 2019-11-01
  • 出版日期: