最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

According to the purposes of high properties of graphite/copper composites, resin carbon-coated graphite/copper composites were fabricated by using phenolic resin-coated graphite, electrolytic copper, silica as raw materials via traditional powder metallurgy method. The difference of the microstructures and properties compared with natural graphite/copper composites and copper-coated graphite/copper composites was researched. The results indicated that the structure of graphite can be protected through phenolic resin. Phenolic resin can break up the oxide layer on the Cu powder surfaces. The reduced Cu can accelerate the elements’ diffusion and sintering between the Cu particles and increase the sintering densification of the Cu matrix. Compare to the natural graphite/copper composites, the physical, mechanical and tribological properties of resin carbon-coated graphite/copper composites improved. The electrical conductivity, flexural strength, hardness are 9.87 MS·m-1, 81 MPa, 22 HV, respectively. These property values are equivalent to copper-coated graphite/copper composites, and tribological properties is a litter better than copper-coated graphite/copper composites.