-1。此外,提出了一種修正并聯本構模型用來分析應變速率、變形溫度及應變對流動應力的影響。然后,基于動態模型,建立了TA7鈦合金的熱加工圖,并通過微觀組織分析對加工圖的準確性進行了驗證。結果表明,TA7鈦合金合理的工藝參數為變形溫度1223K,應變速率0.001s-1,而其非穩態區域位于低溫高應變速率區。"/>

最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
TA7鈦合金高溫變形行為研究
DOI:
作者:
作者單位:

西安建筑科技大學,西安建筑科技大學,西安建筑科技大學,西安建筑科技大學,西安建筑科技大學

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Study on elevated temperature deformation behavior of TA7 titanium alloy
Author:
Affiliation:

Xi''an University of Architecture and Technology,,,,

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    為了分析TA7鈦合金的熱變形工藝參數,通過高溫壓縮試驗對TA7鈦合金的高溫變形行為進行了研究。試驗溫度為1123~1273K,應變速率為0.001~1s-1。此外,提出了一種修正并聯本構模型用來分析應變速率、變形溫度及應變對流動應力的影響。然后,基于動態模型,建立了TA7鈦合金的熱加工圖,并通過微觀組織分析對加工圖的準確性進行了驗證。結果表明,TA7鈦合金合理的工藝參數為變形溫度1223K,應變速率0.001s-1,而其非穩態區域位于低溫高應變速率區。

    Abstract:

    In this study, isothermal compression tests at the temperature range of 1123 - 1273K and the strain rate range of 0.001 - 1s-1 were conducted to analyze the elevated temperature deformation behavior of TA7 titanium alloy for the purpose of acquiring the optimum processing parameters. Besides, a modified parallel constitutive model was put forward to illustrate the high temperature flow stress as the function of the strain rate, the deformation temperature and the true strain. Thereafter, the processing map which was on the basis of dynamic materials model was established. Thereafter, the investigation was made from the microstructure of compressed TA7 titanium alloy specimens to validate processing map. According to the result, deformation temperature of 1223K and strain rate of 0.001s-1 were the best processing parameters for the TA7 alloy. In addition, the instability regions located at relatively lower temperature-higher strain rate region.

    參考文獻
    相似文獻
    引證文獻
引用本文

楊曉康,王快社,史佳敏,蔡軍,劉瑩瑩. TA7鈦合金高溫變形行為研究[J].稀有金屬材料與工程,2018,47(8):2341~2346.[Yang Xiaokang, Wang Kuaishe, Shi Jiamin, Cai Jun, Liu Yingying. Study on elevated temperature deformation behavior of TA7 titanium alloy[J]. Rare Metal Materials and Engineering,2018,47(8):2341~2346.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2018-01-22
  • 最后修改日期:2018-05-03
  • 錄用日期:2018-05-18
  • 在線發布日期: 2018-10-17
  • 出版日期: