最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
Mg-9Zn-xAl合金半固態成形的熱力學分析及試驗研究
作者:
作者單位:

商洛學院

作者簡介:

通訊作者:

中圖分類號:

TG146.2

基金項目:

國家自然科學基金項目（面上項目，重點項目，重大項目）


Thermodynamic analysis and experimental investigation of Mg-9Zn-xAl alloy for semi-solid processing
Author:
Affiliation:

Shangluo University

Fund Project:

Project(51464031, 51471123) supported by the National Natural Science Foundation of China; Project(16JK1241) supported by Scientific research plan of Shaanxi Education Department; Project(SK2016-29) supported by the planned Science and Technology of Shangluo City.

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    采用相圖計算軟件Pandat計算了Mg-9Zn-xAl(x=2, 4, 6)合金的凝固溫度窗口、固相率對溫度的敏感性、溫度加工窗口和相組成及其轉變路徑，并進行了實驗驗證。結果表明：Mg-9Zn-xAl鎂合金適合進行半固態成形，其半固態加工溫度窗口較大，易于進行半固態成形操作，且在半固態加工溫度區間，其固相率對溫度的敏感性均小于0.015。當Al含量不同時，其相的轉變溫度和路徑不同。Mg-9Zn-xAl在凝固過程中均形成α-Mg、MgZn，Mg32(Al,Zn)49和Al5Mg11Zn4相，當Al含量增加至6%時形成了Mg17Al12相。自孕育流變成形Mg-9Zn-xAl合計的晶粒尺寸和圓整度分別為65.3μm、56.5μm、52.2μm和1.3、1.19、1.23。當工作溫度為150℃時，其抗壓強度和抗壓變形量分別為278MPa、283MPa、295MPa和36.22%、33.02%、31.21%。

    Abstract:

    Solidification temperature range, temperature sensitivity of solid fraction, temperature process window and phase composition and transformation path of Mg-9Zn-xAl(x=2,4,6) were calculated by Pandat calculation, and studied by experiment. The results indicate that the bigger temperature window is conducive to the control and operation of semi-solid forming for Mg-9Zn-xAl alloy, and the temperature sensitivity of solid fraction is all smaller than 0.015. Mg-9Zn-xAl alloy has the different transformation temperature and path of the phase at the different Al addition. α-Mg, MgZn, Mg32(Al,Zn)49 and Al5Mg11Zn4 were formed in all samples, when Al addition is increased to 6%, Mg17Al12 phase was formed. The grain size and roundness of Mg-9Zn-xAl alloys which prepared by self-inoculation rheo-diecasting method are 65.3μm, 56.5μm, 52.2μm and 1.3, 1.19, 1.23 respectively. When the operating temperature is 150℃, the comprehensive strength and deformation are 278MPa, 283MPa, 295MPa and 36.22%, 33.02%, 31.21% respectively.

    參考文獻
    相似文獻
    引證文獻
引用本文

李春,崔樂,范新會. Mg-9Zn-xAl合金半固態成形的熱力學分析及試驗研究[J].稀有金屬材料與工程,2019,48(6):1769~1776.[Li Chun, Cui Le, Fan Xinhui. Thermodynamic analysis and experimental investigation of Mg-9Zn-xAl alloy for semi-solid processing[J]. Rare Metal Materials and Engineering,2019,48(6):1769~1776.]
DOI：10.12442/j. issn.1002-185X.20180049

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2018-01-13
  • 最后修改日期:2018-04-21
  • 錄用日期:2018-04-26
  • 在線發布日期: 2019-07-30
  • 出版日期: