最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
預時效工藝對Ti-3.5Al-5Mo-6V-3Cr-2Sn-0.5Fe鈦合金組織與性能的影響
作者:
作者單位:

1.內蒙古工業大學材料科學與工程學院;2.西北有色金屬研究院

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金青年基金(項目號516010990);內蒙古自然科學基金(項目號2016BS0506);內蒙古工業大學科學研究重點基金(項目號ZD201607); 內蒙古自治區重大基礎研究開放課題


Effect of Pre Aging Microstructure on the Mechanical Properties of Ti-3.5Al-5Mo-6V-3Cr-2Sn-0.5Fe
Author:
Affiliation:

1.School of Materials Science and Engineering,Inner Mongolia University of Technology;2.Northwest Institute for Nonferrous Metal Research,Xi’an

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    對Ti-3.5Al-5Mo-6V-3Cr-2Sn-0.5Fe鈦合金分別進行單級和雙級時效熱處理,對比研究雙級時效工藝對高強β鈦合金組織與性能影響。單級時效溫度為550℃,雙級時效工藝采用在400℃預時效之后再進行550℃下的再時效處理。研究結果表明,合金在400℃預時效時析出了ω相,隨著預時效時間的延長,ω相最終轉變?yōu)棣料唷Ｏ啾葐渭墪r(shí)效而言,合金經雙級時效后其次生α相顯微組織得到明顯細化,其原因主要是因?yàn)轭A(yù)時效階段為后續較高溫度下次生α相的形核與長大提供了更多的形核質點。雙級時效工藝可以大幅提高合金的強度及硬度,但是塑性略有下降。

    Abstract:

    The microstructure evolution and mechanical properties of Ti-3.5Al-5Mo-6V-3Cr-2Sn-0.5Fe alloy after single and duplex aging treatment were studied. The Single aging temperature was 550℃, the duplex aging was pre-aged at 400 ℃ then re-aged at 550℃. The results showed that when the alloy pre-aged at 400℃, the ω phase was precipitated. As the pre-aging time prolonged, the ω phase finally changed to the α phase. Duplex aging was effective to yield the α phase fine dispersion, and the pre precipitated isothermal ω phase provided more uniform nucleation position for precipitation of α phase than single aging so as to improve the alloy tensile strengthen greatly. During pre aging, the isothermal ω phase could precipitate sufficiently so as to provide more advantageous nucleation position to precipitate very fine α phase of acicular style, and the strengthening effect was the same with that of duplex aging.

    參考文獻
    相似文獻
    引證文獻
引用本文

杜趙新,劉國龍,崔曉明,劉慧敏,程軍.預時效工藝對Ti-3.5Al-5Mo-6V-3Cr-2Sn-0.5Fe鈦合金組織與性能的影響[J].稀有金屬材料與工程,2019,48(6):1904~1908.[Du Zhaoxin, Liu Guolong, Cui Xiaoming, Liu Huimin, Cheng Jun. Effect of Pre Aging Microstructure on the Mechanical Properties of Ti-3.5Al-5Mo-6V-3Cr-2Sn-0.5Fe[J]. Rare Metal Materials and Engineering,2019,48(6):1904~1908.]
DOI：10.12442/j. issn.1002-185X.20171113

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2017-12-04
  • 最后修改日期:2018-02-03
  • 錄用日期:2018-05-08
  • 在線發布日期: 2019-07-30
  • 出版日期: