最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
鎢錫復合粉末的制備與爆炸壓實
作者:
作者單位:

大連理工大學工程力學系

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金項目（面上項目，重點項目，重大項目）


Fabrication of tungsten–tin alloy powder and consolidate it by explosive consolidation
Author:
Affiliation:

1.Department of Engineering Mechanics, Dalian University of Technology, Dalian, Liaoning 116024, People’s Republic of China;2.Dalian University of Technology

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    本文運用爆炸壓實去固結鎢錫合金粉末。為了的到鎢錫合金粉末,先研究了鎢與錫之間的可焊接性,檢測結果表明鎢錫的交界面結合緊密,說明在這種方法下鎢錫是可以焊接在一起的。鎢錫的可焊性為鎢錫合金粉末的制備提供了依據。材料的維氏硬度對其粉末的爆炸壓實至關重要,為了得到鎢錫材料的維氏硬度,運用爆炸壓實去固結鎢錫合金粉末。運用連續壓倒探針測量實驗中所使用的銨油炸藥的爆速,并運用測量的出爆速計算出炸藥的爆壓約為3.24GPa. 爆炸壓實后鎢錫塊體的密度為16.017 g cm-3。實驗得到的鎢錫塊體的維氏硬度在210-247HV之間。

    Abstract:

    This paper aimed to use explosive consolidation to fabricate tungsten–tin alloy powder. The tungsten–tin alloy powder was prepared at first. In order to obtain tungsten–tin alloy powder, the weldability between tungsten and tin was studied. The tungsten–tin interface did not show any crack, indicating the successful welding of tungsten and tin. Result provided basis for producing tungsten–tin alloy powder. The Vickers hardness (HV) is very important to explosive consolidation. In order to obtain HV of the tungsten–tin alloy material, the tungsten–tin powder was consolidated by explosive consolidation. The detonation velocity (DC-J) of ammonium nitrate fuel oil (ANFO) was measured by continuous velocity probe. The detonation pressure (PC-J) was approximately 3.24 GPa simulated by DC-J. The density of the consolidated tungsten–tin alloy block was 16.017 g cm-3. The hardness values of the tungsten–tin alloy block were in the range of 210–247 HV.

    參考文獻
    相似文獻
    引證文獻
引用本文

李曉杰,陳翔,李科斌,閆鴻浩,王小紅.鎢錫復合粉末的制備與爆炸壓實[J].稀有金屬材料與工程,2019,47(3):782~787.[Xiaojie Li, Xiang Chen, Kebin Li, Honghao Yan, Xiaohong Wang. Fabrication of tungsten–tin alloy powder and consolidate it by explosive consolidation[J]. Rare Metal Materials and Engineering,2019,47(3):782~787.]
DOI：10.12442/j. issn.1002-185X.20170826

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2017-09-10
  • 最后修改日期:2017-09-22
  • 錄用日期:2017-10-12
  • 在線發布日期: 2019-04-10
  • 出版日期: