最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
等通道轉角擠壓Mg-3.52Sn-3.32Al合金的組織與力學性能
作者:
作者單位:

1.西安理工大學;2.廣東省材料與加工研究所廣東省金屬?gòu)?qiáng)韌化技術與應用重點實驗室;3.西安工業大學

作者簡介:

通訊作者:

中圖分類號:

基金項目:

陜西省科技計劃項目2010K10-08，陜西省教育廳科學研究計劃項目2013JK0906，陜西省光電功能材料與器件重點實驗室項目ZSKJ201302，廣東省金屬?gòu)?qiáng)韌化技術與應用重點實驗室項目（2014B030301012），廣東省高新技術產業化項目（2013B010102021），陜西省光電功能材料與器件重點實驗室項目（ZSKJ201302）資助


Microstructure and tensile properties of solutionized Mg-3.52Sn-3.32Al alloy deformed by equal channel angular pressing
Author:
Affiliation:

1.Xi''an University of Technology;2.Guangdong Provincial Key Laboratory for Technology and Application of Metal Toughening, Guangdong Institute of Materials and Processing;3.Xi''an Technological University

Fund Project:

Shaanxi Provincial Science and Technology Plan Project (2010K10-08); the Scientific Research Project of Education Department of Shaanxi Province (2013JK0906); the fund of Shaanxi Key Laboratory of Optoelectronic Functional Materials and Devices (No.ZSKJ201302); Natural Science Foundation of Guangdong Province (2016A030313802); Project on Scientific Research of Guangzhou City (201707010393).

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    采用等通道轉角擠壓（ECAP）Bc路徑對固溶態Mg-3.52Sn-3.32Al合金分別擠壓1、4和8道次。利用光學顯微鏡、掃描電子顯微鏡、透射電子顯微鏡和X射線衍射儀分析合金的組織和相組成，并測試了其室溫拉伸力學性能。結果表明，經ECAP擠壓后，固溶態合金組織中析出大量細小的Mg2Sn相和極少量的Mg17Al12相。隨擠壓道次增加，合金的綜合力學性能先提高后降低。經4道次擠壓后，合金的綜合拉伸力學性能相對較佳，抗拉強度、伸長率和硬度分別達到250 MPa、20.5%和61.3 HV9.8，較未ECAP時分別提高43.7%、105%和26.9%。經ECAP擠壓的合金室溫拉伸斷口均呈韌性斷裂。等通道轉角擠壓Mg-3.52Sn-3.32Al合金的力學性能受晶粒尺寸、析出相以及組織織構的共同影響。

    Abstract:

    The solutionized Mg-3.52Sn-3.32Al(wt.%) alloy was processed by equal channel angular pressing (ECAP) via route Bc for 1, 4, and 8 passes, respectively. The microstructure and phase composition of the alloy were analyzed by optical microscope, scanning electron microscopy, transmission electron microscopy and X-ray diffraction, and the room-temperature mechanical properties were measured. The results show that many fine Mg2Sn particles and a few Mg17Al12 phases precipitate in the alloy after ECAP. The mechanical properties of the alloy first increase and then decrease gradually with increasing extrusion passes. The alloy possesses better mechanical properties after ECAP for four passes, the ultimate tensile strength, elongation and hardness increase to 250 MPa, 20.5% and 61.3 HV9.8 respectively, which is increased by 43.7%, 105% and 26.9% compared with the solutionized alloy. The room temperature fractograph of the ECAP processed alloy is ductile-fractured morphology under tensile condition.The mechanical properties of the ECAP processed Mg alloy is dependent on the grain size, precipitate and texture.

    參考文獻
    相似文獻
    引證文獻
引用本文

張忠明,黃正華,任偉偉,徐春杰,惠增哲.等通道轉角擠壓Mg-3.52Sn-3.32Al合金的組織與力學性能[J].稀有金屬材料與工程,2019,48(2):385~393.[zhang zhongming, HUANG Zhenghua, Ren Weiwei, Xu Chunjie, Xi Zengzhe. Microstructure and tensile properties of solutionized Mg-3.52Sn-3.32Al alloy deformed by equal channel angular pressing[J]. Rare Metal Materials and Engineering,2019,48(2):385~393.]
DOI：10.12442/j. issn.1002-185X.20170814

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2017-09-08
  • 最后修改日期:2019-02-15
  • 錄用日期:2018-09-14
  • 在線發布日期: 2019-03-15
  • 出版日期: