最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
冷軋預變形量對1460合金組織和性能的影響
作者:
作者單位:

中國科學院金屬研究所

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Effect of different cold rolling reduction on the microstruture and mechanical properties of the 1460 alloy
Author:
Affiliation:

Institute of Metal Research,Chinese Academy of Sciences

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    本文研究了時效前不同冷軋預變形量(ε=7%,14%,20%,27%)對1460合金沉淀強化過程的影響。當冷軋變形量增加至20%時,合金中出現位錯墻(Dense Dislocation Wall)。位錯為T1相提供了形核位置,使得合金中T1相的數量增加同時尺寸保持在100 nm 左右,縮短了時效峰值時間。27%冷軋變形+160 ℃/12 h時效能提高合金的強度,同時塑性較好,此時合金的抗拉強度和延伸率分別為590 MPa和8%。

    Abstract:

    The effects of different cold rolling reduction ratio(ε=7%,14%,20%,27%) prior to aging on pricipitation hardening of the 1460 alloy have been studied. Some dense dislocation walls (DDW) have developed in the Al matrix in the ε= 20% sample.The matrix dislocations provide nucleation sites for the T1 phase, thus the pricipitation of the T1 is enhanced and its size remians about 100 nm, furthermore the samples reach the peak strength in a shorter time. The preferable process is 27% cold rolling reduction + 160 ℃/12 h. The results show that the tensile strength and elongation of the samples could be increased to 590 MPa and 8.0%.

    參考文獻
    相似文獻
    引證文獻
引用本文

馬娟,閆德勝,戎利建,李依依.冷軋預變形量對1460合金組織和性能的影響[J].稀有金屬材料與工程,2019,48(2):594~600.[Juan Ma, Desheng Yan, Lijian Rong, Yiyi Li. Effect of different cold rolling reduction on the microstruture and mechanical properties of the 1460 alloy[J]. Rare Metal Materials and Engineering,2019,48(2):594~600.]
DOI:10.12442/j. issn.1002-185X.20170617

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2017-07-14
  • 最后修改日期:2017-08-31
  • 錄用日期:2017-09-12
  • 在線發布日期: 2019-03-15
  • 出版日期: