最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
不同冷速對TC4鈦合金組織和性能的影響
作者:
作者單位:

貴州大學，材料與冶金學院

作者簡介:

通訊作者:

中圖分類號:

基金項目:

貴州省科技廳重大專項(黔科合重大專項字(2014)6013)；貴州省科技廳工業攻關項目(黔科合GZ字(2014)3018號)


The effect of cooling rate on microstructure and mechanical properties of TC4 titanium alloy
Author:
Affiliation:

1.College of materials and metallurgy,University of Guizhou,Guizhou Guiyang;2.College of materials and metallurgy,University of Guizhou

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    對TC4鈦合金進行了不同冷速的熱處理，得到了不同層次（晶粒、叢域、片層）的顯微組織，建立了以片層組織尺寸為基礎的Hall-Petch關系。結果表明：隨著冷卻速率的增加，片層細化，對應的屈服強度和抗拉強度逐漸升高，塑性逐漸降低。片層尺寸和力學性能之間較好地吻合Hall-Petch關系，是影響力學性能的主要特征參量。

    Abstract:

    The different level microstructure (grains,colonies and lamellas)were obtained when TC4 titanium alloy was heat-treated at different cooling rates, and the Hall-Petch relation was established based on different level microstructure. With the increase of cooling rate, the lamellas were refined; the yield strength and tensile strength increased, whereas the ductility gradually decreased.The relationship between lamella size and mechanical properties was in line with Hall-Petch relation, therefore the lamella was the main characteristic parameter affecting the mechanical propertiesand.

    參考文獻
    相似文獻
    引證文獻
引用本文

歐梅桂,夏麒帆,宋洪超,梁益龍.不同冷速對TC4鈦合金組織和性能的影響[J].稀有金屬材料與工程,2019,48(2):638~643.[Ou Meigui, Xia Qifan, Song Hongchao, Liang Yilong. The effect of cooling rate on microstructure and mechanical properties of TC4 titanium alloy[J]. Rare Metal Materials and Engineering,2019,48(2):638~643.]
DOI：10.12442/j. issn.1002-185X.20170571

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2017-06-28
  • 最后修改日期:2017-08-23
  • 錄用日期:2017-09-11
  • 在線發布日期: 2019-03-15
  • 出版日期: