最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
爆炸焊接304/Q245復合鋼界面結構及剪切行為各向異性研究
DOI:
作者:
作者單位:

南昌大學機電工程學院,南昌大學機電工程學院

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金資助(項目號11662010, 11202093)


Study of the Heterogeneity on Interface Structure and Shear Performance for the 304 Stainless Steel /Q245 Steel Explosive Welding Plate
Author:
Affiliation:

School of Mechanical Electrical Engineering,Nanchang University,School of Mechanical Electrical Engineering,Nanchang University

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    以304不銹鋼 /Q245普碳鋼焊接界面為研究對象,本文系統地探討了界面結構不均勻性及其對服役行為的影響。研究過程中首先觀察橫截面、縱剖面結構的不均勻性,并基于非平衡運動方程,解釋界面結構產生不均勻性的機理。進一步,針對界面波的方向特性,測試其剪切行為隨定位角變化特征。最后利用SEM觀察剪切斷口形貌,認識界面結構對其斷裂模式影響。研究表明,爆炸焊接裝藥爆轟壓力脈動是導致界面結構不均勻性的根本原因,而界面波延展方向決定了斷裂失效模式和損傷裂紋擴展行為；此外,本文獲得了界面最優剪切強度承載方向,可指導爆炸復合材料應用于工程實踐。

    Abstract:

    The 304 stainless steel/Q245 carbon steel explosive welding interface was taken as the research object to systematically detect the structure heterogeneity and its effect on the shear behavior in engineering application. First, characters on the transverse section and longitudinal section of the welding interface were detected. And based on the non-equilibrium theory, the mechanism of the heterogeneity on the welding interface has been explained. Furthermore, taking into account the wavy structure and its undulance along the detonation direction, shear performances varied with orientation angles were measured according to the national standard (GB/T 6396-2008). Finally, the morphologies of fracture surface were observed by SEM to recognize the influence of welding interface structure on the failure mode. Results show out that the explosive detonation pressure fluctuation is the fundamental cause of the inhomogeneity on the welding interface, the failure mode and cracks developments were determined by the undulation characters of wavy interface. Besides, an optimal orientation angle, on which samples have the maximum shear strength, was revealed. All of them can be used to guide the engineering application for explosive welding plates.

    參考文獻
    相似文獻
    引證文獻
引用本文

付艷恕,王震.爆炸焊接304/Q245復合鋼界面結構及剪切行為各向異性研究[J].稀有金屬材料與工程,2018,47(8):2458~2464.[Fu Yanshu, Wang Zhen. Study of the Heterogeneity on Interface Structure and Shear Performance for the 304 Stainless Steel /Q245 Steel Explosive Welding Plate[J]. Rare Metal Materials and Engineering,2018,47(8):2458~2464.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2016-08-18
  • 最后修改日期:2016-10-19
  • 錄用日期:2016-11-11
  • 在線發布日期: 2018-10-17
  • 出版日期: