最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
鎂合金雙道次熱變形靜態軟化及殘余應變研究
DOI:
作者:
作者單位:

太原科技大學重型機械教育部工程研究中心,太原科技大學重型機械教育部工程研究中心,太原科技大學重型機械教育部工程研究中心,太原科技大學重型機械教育部工程研究中心

作者簡介:

通訊作者:

中圖分類號:

TG146.22

基金項目:

國家自然科學基金（51105264, U1510131），山西省重點研發計劃（201603D121010），江蘇省“雙創團隊”領軍人才項目，晉城市科技計劃項目（20155010）資助


The Study on Static Softening and Residual Strain in the Two-stage Thermal Deformation of Magnesium alloy
Author:
Affiliation:

Taiyuan University of Science and Technology,Heavy machinery engineering research center of the ministry education,Taiyuan University of Science and Technology,Heavy machinery engineering research center of the ministry education,Taiyuan University of Science and Technology,Heavy machinery engineering research center of the ministry education,

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    在變形溫度250~450℃、變形速率0.005~5s-1和道次間隔時間15~240s下對AZ31B鎂合金進行了雙道次等溫壓縮試驗,研究不同變形工藝條件對AZ31B鎂合金道次間軟化規律的影響,建立了AZ31B鎂合金道次間軟化率預測模型。根據軋制殘余應變產生的原因提出了多道次軋制過程中殘余應變率的計算方法。研究結果表明：隨著變形溫度和變形速率的提高,材料的靜態軟化率逐漸增大,道次間間隔時間越長材料軟化程度越大。建立的道次間靜態軟化率計算模型能夠很好地表征AZ31B鎂合金道次間軟化規律,平均相對誤差為12.58%。進一步對殘余應變率的精確計算能夠為AZ31B鎂合金多道次軋制過程中軋制力的求解提供理論支持。

    Abstract:

    The Static softening behavior in the two-stage isothermal compression of AZ31B magnesium alloy is investigated at the deformation temperatures ranging from 250℃ to 450℃, strain rates ranging from 0.005s-1 to 1s-1 and the inter-pass times ranging from 15s to 240s after the first stage isothermal compression. The prediction model of softening rate was established. According to the essence of rolling residual strain rate, the calculation method of residual strain rate in multi pass rolling process was proposed. The results show that the static softening fraction increases with the increasing of deformation temperature, strain rate and the inter-pass times. The softening rate calculation model can be used to characterize the softening rule of AZ31B magnesium alloy, the average relative error is 12.58%.The calculation model of residual strain rate can provide technical support for solving the deformation resistance of AZ31B magnesium alloy during multi pass deformation process.

    參考文獻
    相似文獻
    引證文獻
引用本文

范沁紅,馬立峰,蔣亞平,賈偉濤.鎂合金雙道次熱變形靜態軟化及殘余應變研究[J].稀有金屬材料與工程,2017,46(6):1590~1595.[Fan Qinhong, Ma Lifeng, Jiang Yaping, Jia Weitao. The Study on Static Softening and Residual Strain in the Two-stage Thermal Deformation of Magnesium alloy[J]. Rare Metal Materials and Engineering,2017,46(6):1590~1595.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2016-07-05
  • 最后修改日期:2016-08-23
  • 錄用日期:2016-09-18
  • 在線發布日期: 2017-11-07
  • 出版日期: