最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
復合加工制備的超細晶工業純鈦室溫蠕變行為研究
DOI:
作者:
作者單位:

西安建筑科技大學冶金工程學院,西安建筑科技大學冶金工程學院,西安建筑科技大學冶金工程學院,西安建筑科技大學冶金工程學院,西安建筑科技大學冶金工程學院

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金面上項目(51474170)；陜西省自然科學基礎研究青年人才項目(2016JQ5026) )；陜西省教育廳重點實驗室項目(15JS058 )；


Investigation of creep behavior of ultra-fine grained CP-Ti processed by combined machining at room temprature
Author:
Affiliation:

School of Metallurgical Engineering,Xi’an University of Architecture and Technology,Xi’an,School of Metallurgical Engineering,Xi’an University of Architecture and Technology,Xi’an,School of Metallurgical Engineering,Xi’an University of Architecture and Technology,Xi’an,School of Metallurgical Engineering,Xi’an University of Architecture and Technology,Xi’an,School of Metallurgical Engineering,Xi’an University of Architecture and Technology,Xi’an

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    工業純鈦TA1經等徑彎曲通道變形(Equal channel angular pressing, ECAP)+冷軋(Cold Rolling, CR)+旋鍛(Swaging)的方法制得晶粒尺寸約為120 nm的超細晶工業純鈦，通過單軸拉伸蠕變實驗、透射電子顯微鏡（TEM）、掃描電子顯微鏡（SEM）等方法，研究室溫下超細晶工業純鈦蠕變變形行為及機理。結果表明：在實驗應力范圍內，超細晶工業純鈦存在明顯的室溫蠕變現象；隨加載應力的上升(640MPa~760MPa)，蠕變量增加，穩態蠕變速率增大(2.8×10-7s-1~1.5×10-4s-1)；在相同蠕變應力水平(0.8σs)下，超細晶工業純鈦穩態蠕變速率(2.8×10-7s-1)低于粗晶工業純鈦(8.6×10-6s-1)，抗蠕變性能優于粗晶工業純鈦；位錯滑移機理是其主要蠕變變形機理，蠕變斷裂機制為韌性斷裂。

    Abstract:

    Ultra-fine grained commercially pure (CP) Ti with an average grain size of 120 nm was fabricated by equal channel angular pressing (ECAP) following cold rolling (CR) and swaging at room temperature. Uniaxial tensile creep tests, transmission electron microscope and scanning electron microscope were applied to investigate the creep behavior and mechanism of ultra-fine grained CP Ti. The results showed that a significant creep deformation at room temperature occurred in the ultra-fine grained CP Ti. The steady creep rate increased from 2.8×10-7 s-1 to 1.5×10-4 s-1 as the creep stress increased from 640 MPa to 760 MPa. Ultra-fine grained CP Ti had lower steady creep rate than the coarse-grained CP Ti at the same stress level, which indicated that ultra-fine grained CP Ti had higher creep resistance. The creep mechanism of ultra-fine grained CP Ti is dislocation movement. The creep fracture morphology of ultra-fine grained CP Ti exhibited ductile fracture with dimples.

    參考文獻
    相似文獻
    引證文獻
引用本文

楊西榮,陳小龍,羅雷,劉曉燕,蔡文華.復合加工制備的超細晶工業純鈦室溫蠕變行為研究[J].稀有金屬材料與工程,2018,47(7):2126~2131.[Yang Xirong, Chen Xiaolong, Luo Lei, Liu Xiaoyan, Cai Wenhua. Investigation of creep behavior of ultra-fine grained CP-Ti processed by combined machining at room temprature[J]. Rare Metal Materials and Engineering,2018,47(7):2126~2131.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2016-06-27
  • 最后修改日期:2016-08-30
  • 錄用日期:2016-09-14
  • 在線發布日期: 2018-10-10
  • 出版日期: