最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
基于應變補償和修正項的新型鋁鋰合金溫?zé)嶙冃伪緲?gòu)模型
DOI:
作者:
作者單位:

南京航空航天大學,南京航空航天大學,南京航空航天大學,南京航空航天大學

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Constitutive Model of New Al-Li Alloy during Warm Deformation Considering Strain Compensation and Correction Term
Author:
Affiliation:

Nanjing University of Aeronautics and Astronautics,Nanjing University of Aeronautics and Astronautics,Nanjing University of Aeronautics and Astronautics,Nanjing University of Aeronautics and Astronautics

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    采用UTM5000電子萬能拉伸試驗機,在變形溫度573~648K和應變速率0.001~0.1s-1條件下對2060-T8鋁鋰合金進行等溫恒應變速率拉伸試驗，得到其在變形過程中的真應力-真應變曲線，建立了基于應變補償和修正項的溫?zé)嶙冃伪緲?gòu)方程。通過掃描電子顯微鏡(SEM)分析拉伸斷口，對2060-T8鋁鋰合金的溫?zé)嶙冃涡袨檫M行研究。結果表明：2060-T8鋁鋰合金對變形溫度和應變速率具有較高的敏感性，流變應力曲線呈現出應變硬化和流變軟化的特征，隨著變形溫度的升高和應變速率的降低，穩態流變特征逐漸消失，其在溫?zé)嶙冃螚l件下的斷裂形式為韌性斷裂。修正的本構模型與實驗值吻合度較高，可以為2060-T8鋁鋰合金溫?zé)嶙冃蔚挠邢拊M提供前提條件。

    Abstract:

    Isothermal tensile tests of 2060-T8 Al-Li alloy were conducted on a UTM5000 electronic universal tensile testing machine at deformation temperature ranging from 573 to 648K and strain rate ranging from 0.001 to 0.1s-1. The true stress-strain curves of 2060-T8 Al-Li alloy were obtained and constitutive equation considering the strain compensation as well as correction term was also established. The warm deformation behavior of 2060-T8 Al-Li alloy was investigated by the analysis of tensile fractures using scanning electron microscopy (SEM). The results show that 2060-T8 Al-Li alloy is highly sensitive to deformation temperature and strain rate. The true stress-strain curves show the characteristics of strain hardening followed by flow softening and steady flow characteristic gradually disappears with the increase of deformation temperature and the decrease of strain rate. In addition, 2060-T8 Al-Li alloy is of ductile fracture during warm deformation. The modified constitutive model is in great agreement with the experimental data, which can provide a precondition for the finite element analysis of 2060-T8 Al-Li alloy during warm deformation.

    參考文獻
    相似文獻
    引證文獻
引用本文

杜舜堯,陳明和,謝蘭生,陳燦.基于應變補償和修正項的新型鋁鋰合金溫?zé)嶙冃伪緲?gòu)模型[J].稀有金屬材料與工程,2018,47(7):2113~2119.[Du Shunyao, Chen Minghe, Xie Lansheng, Chen Can. Constitutive Model of New Al-Li Alloy during Warm Deformation Considering Strain Compensation and Correction Term[J]. Rare Metal Materials and Engineering,2018,47(7):2113~2119.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2016-06-23
  • 最后修改日期:2016-08-13
  • 錄用日期:2016-08-31
  • 在線發布日期: 2018-10-10
  • 出版日期: