最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
攪拌摩擦焊接Al-Mg-(Zn) 合金的腐蝕行為
DOI:
作者:
作者單位:

北京科技大學新金屬材料國家重點實驗室,北京科技大學新金屬材料國家重點實驗室,北京科技大學新金屬材料國家重點實驗室,北京科技大學新金屬材料國家重點實驗室,哈爾濱工業大學(威海)山東省特種焊接技術重點實驗室,北京科技大學新金屬材料國家重點實驗室

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金項目（面上項目，重點項目，重大項目）;國家杰出青年科學基金;交通用金屬材料與加工北京實驗室項目;新金屬材料國家重點實驗室項目


Corrosion Behavior of Friction Stir Welded Al-Mg-(Zn) Alloys
Author:
Affiliation:

State Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing,State Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing,State Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing,State Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing,Shandong Provincial Key Laboratory of Special Welding,Harbin Institute of Technology at Weihai,State Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing

Fund Project:

The National Natural Science Foundation of China (General Program, Key Program, Major Research Plan);The National Science Fund for Distinguished Young Scholars;Beijing Laboratory of Metallic Materials and Processing for Modern Transportation, China; State Key Lab of Advanced Metals and Materials, China

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    本文研究了攪拌摩擦焊接含Zn Al-Mg合金的腐蝕行為及焊后熱處理對攪拌摩擦焊接合金腐蝕行為的影響。結果表明,經焊后熱處理后不同焊接區的最大腐蝕深度和主導腐蝕模式隨Zn含量增加而發生明顯變化。Zn的加入使主導腐蝕模式由晶間腐蝕變?yōu)辄c蝕。與加工硬化態合金相比,時效硬化態合金具有嚴重的電偶腐蝕傾向。對于析出強化Al-Mg-Zn合金而言,這在很大程度上與不連續分布的晶界析出相及豐富的晶內析出相的形成密切相關,而對無Zn的Al-Mg合金,其則與連續分布的晶界β-AlMg相相關。

    Abstract:

    The corrosion behavior of friction stir welded Zn-modified Al-Mg alloys are systematically investigated as well as the effects of pre-weld temper conditions on the corrosion behavior of the friction stir welded alloys. Both maximum corrosion depth and dominating corrosion mode in different weld regions after post welding heat treatment show obvious variations with an increase in the Zn content. With Zn additions the dominating corrosion mode changes from intergranular corrosion to pitting corrosion, and the severe galvanic corrosion tendency obviously occurs in the precipitation hardened alloys compared to that of the strain hardened alloy. This would be greatly related with the formation of discontinuously distributed grain boundary precipitates as well as abundant intragranular precipitates (mainly T-AlZnMgCu phase) in the precipitation hardened Al-Mg-Zn alloys while it is in line with the continuously distributed β-AlMg phase along grain boundary in the Zn-free Al-Mg alloys.

    參考文獻
    相似文獻
    引證文獻
引用本文

侯隴剛,于佳佳,張迪,莊林忠,周利,張濟山.攪拌摩擦焊接Al-Mg-(Zn) 合金的腐蝕行為[J].稀有金屬材料與工程,2017,46(9):2437~2444.[Longgang Hou, Jiajia Yu, Di Zhang, Linzhong Zhuang, Li Zhou, Jishan Zhang. Corrosion Behavior of Friction Stir Welded Al-Mg-(Zn) Alloys[J]. Rare Metal Materials and Engineering,2017,46(9):2437~2444.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2016-06-20
  • 最后修改日期:2017-09-11
  • 錄用日期:2017-02-23
  • 在線發布日期: 2017-11-29
  • 出版日期: