最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
β轉變組織TA15鈦合金塑性流動失穩行為研究
DOI:
作者:
作者單位:

南昌航空大學,南昌航空大學,南昌航空大學,南昌航空大學

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金資助(項目號51261020)；航空科學基金資助(項目號2014ZE56015)；江西省教育廳科學技術項目資助(項目號GJJ150734)


Study of the Plascticity Flow Instability Behavior of TA15 Tiatanium Alloy with Beta Transformed Microstructure
Author:
Affiliation:

Nanchang Hangkong University,Nanchang Hangkong University,Nanchang Hangkong University,Nanchang Hangkong University

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    本文采用THERMECMASTOR-Z型熱模擬實驗機對魏氏和網籃兩種β轉變組織TA15鈦合金在溫度750℃-950℃、應變 速率0.001s-1-10s-1范圍進行等溫恒應變速率壓縮實驗。實驗結果表明，兩種β轉變組織鈦合金在低溫（750℃-880℃）和高應 變速率（0.0032s-1-10s-1）范圍存在較大區域的塑性流動失穩，且魏氏組織的塑性流動失穩范圍更大，在溫度750℃-775℃、應變 速率0.001s-1-0.0032s-1和溫度880℃-950℃、應變速率0.56s-1-10s-1區域也出現了塑性流動失穩。魏氏組織的塑性流動失穩缺陷 主要有45°宏觀剪切裂紋、微裂紋和局部流動帶三種，網籃組織的失穩缺陷主要有45°宏觀剪切裂紋和局部流動帶兩種。魏氏組織比網籃組織更容易發生塑性流動失穩與網籃組織組織更均勻，在變形過程中協調分散性好，不利于產生應力集中有關。

    Abstract:

    Isothermal constant strain rate compression tests of TA15 titanium alloy with basket-weave and Widmannstatten two types of beta transformed microstructurehave been carried out in the temperature range of 750℃-950℃ and strain rate of 0.001s-1-10s-1. The results show that there is a wide range of plastic flow instabilitySof the two beta transformed microstructure at low temperature and high strain rate region (750℃-880℃,0.0032s-1-10s-1).The instability range of Widmannstatten microstructure is larger than that of basket-weave. In the range of 750℃-775℃,0.001s-1-0.0032s-1 and 880℃-950℃,0.56s-1-10s-1 the Widmannstatten microstructure also have plastic flow instability defects.The instability defects of Widmannstatten microstructure have 45° macro shear crack, flow localization band and microcrack. The basket-weave microstructure has 45° macro shear crack and flow localization defects. The plastic flow instability is more likely to happen in Widmannstatten than basket-weave microstructure is primary cause of the difference of the initial alpha lamellar thickness in two beta transformed microstructure.

    參考文獻
    相似文獻
    引證文獻
引用本文

董顯娟,魯世強,王克魯,歐陽德來.β轉變組織TA15鈦合金塑性流動失穩行為研究[J].稀有金屬材料與工程,2018,47(5):1485~1491.[Dong Xianjuan, Lu Shiqiang, Wang Kelu, Ouyang Delai. Study of the Plascticity Flow Instability Behavior of TA15 Tiatanium Alloy with Beta Transformed Microstructure[J]. Rare Metal Materials and Engineering,2018,47(5):1485~1491.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2016-04-28
  • 最后修改日期:2016-07-25
  • 錄用日期:2016-08-18
  • 在線發布日期: 2018-06-08
  • 出版日期: