3C2,經團聚造粒獲得噴涂用復合粉末喂料,采用超音速火焰(HVOF)噴涂系統制備WC-12Co涂層。利用X射線衍射和掃描電鏡對涂層的物相、顯微組織結構等進行了系統表征,并對涂層耐磨性進行了測試分析。結果表明:WC-12Co涂層中WC晶粒的平均尺寸,隨著晶粒長大抑制劑的增加而減小,且抑制劑的添加使涂層的摩擦系數降低;當復合添加抑制劑總含量為1.0wt.%時,WC-12Co涂層的顯微硬度達到最大值1367 HV0.3,且涂層的磨損速率最低;隨抑制劑含量進一步增加,WC-12Co涂層的顯微硬度逐漸降低,磨損速率增加,涂層的耐磨性降低。"/>

最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
復合添加晶粒長大抑制劑對WC-12Co超細晶硬質合金涂層性能的影響
DOI:
作者:
作者單位:

北京工業大學材料科學與工程學院/新型功能材料教育部重點實驗室,北京工業大學材料科學與工程學院/新型功能材料教育部重點實驗室,北京工業大學材料科學與工程學院/新型功能材料教育部重點實驗室,北京工業大學材料科學與工程學院/新型功能材料教育部重點實驗室,北京工業大學材料科學與工程學院/新型功能材料教育部重點實驗室,北京工業大學材料科學與工程學院/新型功能材料教育部重點實驗室

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家“863”計劃主題項目 (項目號2013AA032001),北京市自然科學基金重點項目(項目號2131001),北京市自然科學(項目號2154045)


Effect of Combined Addition of Grain Growth Inhibitors on the WC-12Co Coating
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    本文利用真空原位還原碳化反應合成超細WC-12Co復合粉末,通過復合添加不同含量的晶粒長大抑制劑VC和Cr3C2,經團聚造粒獲得噴涂用復合粉末喂料,采用超音速火焰(HVOF)噴涂系統制備WC-12Co涂層。利用X射線衍射和掃描電鏡對涂層的物相、顯微組織結構等進行了系統表征,并對涂層耐磨性進行了測試分析。結果表明:WC-12Co涂層中WC晶粒的平均尺寸,隨著晶粒長大抑制劑的增加而減小,且抑制劑的添加使涂層的摩擦系數降低;當復合添加抑制劑總含量為1.0wt.%時,WC-12Co涂層的顯微硬度達到最大值1367 HV0.3,且涂層的磨損速率最低;隨抑制劑含量進一步增加,WC-12Co涂層的顯微硬度逐漸降低,磨損速率增加,涂層的耐磨性降低。

    Abstract:

    :The WC-12Co composite powder was synthesized by reduction and carburization reactions. With adding various contents of combined grain growth inhibitors (GGI) VC and Cr3C2 into theWC-12Co compositepowder, the effects of the GGI addition on the phase constitution, microstructure and mechanical properties of the coating havebeen investigated by X-ray diffraction (XRD)and scanning electron microscopy (SEM)respectively. The result shows thatthat with the content of GGI increasing in the composite powder, the abnormal grain growth disappears and homogeneous ultrafine grain structure forms, the coefficient of friction of the coating reduces. When the total amount of inhibitor is added in combination 1.0wt.%, the maximum hardness of WC-12Co coating is 1367 HV0.3, and the wear rate of the coating isthe lowest.Further increasing the content of inhibitor, the wear rate of the coating increases, the hardness and the wear resistanceof the coatingdecreases.

    參考文獻
    相似文獻
    引證文獻
引用本文

王學政,王海濱,劉雪梅,楊濤,占王彬,宋曉艷.復合添加晶粒長大抑制劑對WC-12Co超細晶硬質合金涂層性能的影響[J].稀有金屬材料與工程,2018,47(4):1216~1220.[Wang Xuezheng, Wang Haibin, Liu Xuemei, Yang Tao, Zhan Wangbin, Song Xiaoyan. Effect of Combined Addition of Grain Growth Inhibitors on the WC-12Co Coating[J]. Rare Metal Materials and Engineering,2018,47(4):1216~1220.]
DOI:[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2016-04-08
  • 最后修改日期:2016-05-20
  • 錄用日期:2016-06-12
  • 在線發布日期: 2018-05-31
  • 出版日期: