2O3陶瓷型殼;界面反應"/> 2O3型殼的黑色界面反應產物主要是α-Al2O3,并伴有FeCr2O4, (Fe, Ni)固溶體等多種成分相,界面反應層的厚度一般為5~6μm；界面反應后陶瓷型殼內表面出現了TaO, NiO, HfO2等多種反應產物；降低表面粗糙度、控制型殼礦化劑中的Fe2O3雜質含量,能夠有效抑制界面反應的產生。"/>

最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
Al2O3型殼與DD6單晶合金的界面反應
DOI:
作者:
作者單位:

北京航空材料研究院 先進高溫結構材料重點實驗室,北京航空材料研究院 先進高溫結構材料重點實驗室,北京航空材料研究院 先進高溫結構材料重點實驗室,北京航空材料研究院 先進高溫結構材料重點實驗室,北京航空材料研究院 先進高溫結構材料重點實驗室,北京航空材料研究院 先進高溫結構材料重點實驗室,北京航空材料研究院 先進高溫結構材料重點實驗室

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Interface Reactions between DD6 Single Crystal Superalloy and Al2O3 Molds
Author:
Affiliation:

Science and Technology on Advanced High Temperature Structural Materials Laboratory,Beijing Institute of Aeronautical Materials,Science and Technology on Advanced High Temperature Structural Materials Laboratory,Beijing Institute of Aeronautical Materials,Science and Technology on Advanced High Temperature Structural Materials Laboratory,Beijing Institute of Aeronautical Materials,Science and Technology on Advanced High Temperature Structural Materials Laboratory,Beijing Institute of Aeronautical Materials,Science and Technology on Advanced High Temperature Structural Materials Laboratory,Beijing Institute of Aeronautical Materials,Science and Technology on Advanced High Temperature Structural Materials Laboratory,Beijing Institute of Aeronautical Materials,Science and Technology on Advanced High Temperature Structural Materials Laboratory,Beijing Institute of Aeronautical Materials

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    本文采用掃描電子顯微鏡、能譜分析、X射線衍射分析等手段研究了DD6單晶合金與陶瓷型殼的界面反應。實驗結果表明,DD6高溫合金與Al2O3型殼的黑色界面反應產物主要是α-Al2O3,并伴有FeCr2O4, (Fe, Ni)固溶體等多種成分相,界面反應層的厚度一般為5~6μm；界面反應后陶瓷型殼內表面出現了TaO, NiO, HfO2等多種反應產物；降低表面粗糙度、控制型殼礦化劑中的Fe2O3雜質含量,能夠有效抑制界面反應的產生。

    Abstract:

    The interface reactions between DD6 single crystal superalloy and ceramic shells were investigated by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X ray diffraction analysis (XRD) in this paper. The results show that the black reaction products were α-Al2O3, accompanied by FeCr2O4、taenite-(Fe, Ni) at the same time. The thickness of the reaction layer was about 5~6μm. The reaction products TaO, NiO, HfO2 were observed on the prime coat of the ceramic shell. The interface reactions can be inhibited by reducing the roughness of the facecoat and controlling the content of Fe2O3 in the mineralizer simultaneously.

    參考文獻
    相似文獻
    引證文獻
引用本文

姚建省,李鑫,王麗麗,牛書鑫,劉曉光,唐定中,曹春曉. Al2O3型殼與DD6單晶合金的界面反應[J].稀有金屬材料與工程,2018,47(3):840~845.[Yao Jiansheng, Li Xin, Wang Lili, Niu Shuxin, Liu Xiaoguang, Tang Dingzhong, Cao Chunxiao. Interface Reactions between DD6 Single Crystal Superalloy and Al2O3 Molds[J]. Rare Metal Materials and Engineering,2018,47(3):840~845.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2016-01-13
  • 最后修改日期:2016-02-01
  • 錄用日期:2016-03-30
  • 在線發布日期: 2018-04-11
  • 出版日期: