最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
純鋯中間層擴散連接TC4鈦合金的接頭組織與力學性能
DOI:
作者:
作者單位:

哈爾濱工業大學 先進焊接與連接國家重點實驗室,哈爾濱工業大學 先進焊接與連接國家重點實驗室,哈爾濱工業大學 先進焊接與連接國家重點實驗室,哈爾濱工業大學 先進焊接與連接國家重點實驗室,哈爾濱工業大學 先進焊接與連接國家重點實驗室

作者簡介:

通訊作者:

中圖分類號:

TG146.4

基金項目:

國家自然科學基金資助(51275133, 51321061)


Microstructure and Mechanical Properties of Diffusion Bonded Joint of TC4 Alloy Using Zr Interlayer
Author:
Affiliation:

State Key Laboratory of Advanced Welding and Joining,Harbin Institute of Technology,State Key Laboratory of Advanced Welding and Joining,Harbin Institute of Technology,State Key Laboratory of Advanced Welding and Joining,Harbin Institute of Technology,State Key Laboratory of Advanced Welding and Joining,Harbin Institute of Technology,State Key Laboratory of Advanced Welding and Joining,Harbin Institute of Technology

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    采用純Zr中間層實現了TC4鈦合金的擴散連接。通過掃描電鏡(SEM)、能譜分析(EDS)、X射線衍射(XRD)等方法分析了接頭界面的微觀組織結構,研究了擴散連接工藝參數對接頭界面組織及力學性能的影響規律。結果表明,接頭界面處生成了成分均勻連續的鈦鋯固溶體擴散層,同時擴散層中含有大量板條狀的α′-Ti(鈦馬氏體)相；隨著連接溫度的升高和保溫時間的延長,擴散層的厚度逐漸增加,接頭室溫抗剪強度呈現出先升高后降低的趨勢；當連接溫度800℃、保溫時間40min、連接壓力5MPa時,接頭室溫抗剪強度最高,達到190MPa。

    Abstract:

    Reliable diffusion bonding of TC4 alloy was achieved using Zr interlayer. The interfacial microstructure was characterized by scanning electron microscopy(SEM), energy dispersive spectrum analysis(EDS) and X-ray diffraction(XRD). Effects of joining parameters on the microsturcture and mechanical propertie s of the joints were investigated. The results indicated that (Ti,Zr) diffusion layer with uniform components transition was formed at the interface of the joint, in which consisted of a large amount of lath-like α′-Ti(titanium martensite). With the increase of bonding temperature and holding time, the thickness of the diffusion layer increased, and the shear strength of the joint increased until the maximum shear strength was reached and then decreased. The maximum shear strength was 190MPa when the joint was bonded at 800℃ for 40min under 5MPa.

    參考文獻
    相似文獻
    引證文獻
引用本文

王東,曹健,代翔宇,亓鈞雷,馮吉才.純鋯中間層擴散連接TC4鈦合金的接頭組織與力學性能[J].稀有金屬材料與工程,2018,47(2):677~681.[Wang Dong, Cao Jian, Dai Xiangyu, Qi Junlei, Feng Jicai. Microstructure and Mechanical Properties of Diffusion Bonded Joint of TC4 Alloy Using Zr Interlayer[J]. Rare Metal Materials and Engineering,2018,47(2):677~681.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2015-12-22
  • 最后修改日期:2016-02-09
  • 錄用日期:2016-03-29
  • 在線發布日期: 2018-03-15
  • 出版日期: