2C、M7C3、以及大量的彌散分布的TaC顆粒。復合涂層的硬度可達HV965,是Ni60涂層的1.3倍,主要是因?yàn)門aC顆粒的分布促使其內部組織結構改變以及相變引起的硬度上升。"/>

最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
原位生成WC/TaC復合激光熔覆層組織研究
DOI:
作者:
作者單位:

上海交通大學 機械與動力工程學院,哈爾濱工業大學 先進焊接與連接國家重點實驗室,上海交通大學 機械與動力工程學院,上海交通大學 機械與動力工程學院,上海交通大學 機械與動力工程學院

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金項目（面上項目，重點項目，重大項目）


In-situ synthesis of WC/TaC reinforced nickel-based composite alloy coating by laser cladding
Author:
Affiliation:

School of Mechanical Engineering,Shanghai Jiao Tong University,State Key Lab of Advanced Welding and Joining,Harbin Institute of Technology,Harbin,,School of Mechanical Engineering,Shanghai Jiao Tong University,School of Mechanical Engineering,Shanghai Jiao Tong University

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    利用激光熔覆技術,將氧化鉭和石墨的混合粉末添加到Ni60包WC的鎳基合金粉末中,成功制備了TaC/WC復合涂層。使用掃描電鏡(SEM)、X射線衍射儀(XRD)等儀器分析了鎳基合金復合涂層橫斷面的顯微組織,并對其硬度進行研究分析。結果顯示在基體與涂層之間形成了良好的冶金結合,復合涂層不僅含有γ-Ni樹枝晶、W2C、M7C3、以及大量的彌散分布的TaC顆粒。復合涂層的硬度可達HV965,是Ni60涂層的1.3倍,主要是因?yàn)門aC顆粒的分布促使其內部組織結構改變以及相變引起的硬度上升。

    Abstract:

    An in-situ synthesized WC/TaC reinforced nickel-based composite coatings have been fabricated on AISI 1045 mild carbon steel substrate by laser cladding of powder mixture of Ni60/WC with Ta2O5 and graphite. The microstructure and hardness distribution of WC/TaC/Ni60 composite coating are investigated utilizing scanning electron microscopy (SEM) and X-ray diffraction (XRD) techniques. It is shown that the microstructure of coating has a metallurgical bonding with substrate and is mainly composed of γ-Ni dendrites, W2C, M7C3 carbides, and dispersed TaC particles. The hardness of WC/TaC/Ni60 composite coating has been enhanced to a value similar to that of HV965, which is 1.3 times higher than Ni60 coating. Measurement results demonstrated that these improvements are attributed to the presence of in-situ synthesized TaC particles, microstructure change and phase variations.

    參考文獻
    相似文獻
    引證文獻
引用本文

雍耀維,傅衛,張翔,鄧琦林,楊建國.原位生成WC/TaC復合激光熔覆層組織研究[J].稀有金屬材料與工程,2017,46(11):3176~3181.[Yong Yaowei, Fu Wei, zhang xiang, Deng Qilin, Yang Jianguo. In-situ synthesis of WC/TaC reinforced nickel-based composite alloy coating by laser cladding[J]. Rare Metal Materials and Engineering,2017,46(11):3176~3181.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2015-12-01
  • 最后修改日期:2016-02-03
  • 錄用日期:2016-02-24
  • 在線發布日期: 2017-12-13
  • 出版日期: