最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
多道次熱軋模擬過程中Al-Zn-Mg-Cu-Zr合金的再結晶特征
DOI:
作者:
作者單位:

內蒙古工業大學材料學院,北京有色金屬研究總院,內蒙古工業大學材料學院,江西理工大學

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Recrystallization characterizations of an Al-Zn-Mg-Cu-Zr alloy during multi-pass hot rolling simulation
Author:
Affiliation:

School of Materials Science and Engineering,Inner Mongolia University of Technology,General Research Institute for Non-ferrous,School of Materials Science and Engineering,Inner Mongolia University of Technology,Institute of engineering research,JiangXi University of Science and Technology

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    采用Gleeble-1500D熱模擬實驗機根據設計的軋制工藝對7055合金進行多道次熱壓縮試驗,模擬其企業熱軋過程,采用電子背散射衍射和透射電鏡研究了再結晶特征。在不同變形條件下,表現出不同的再結晶機制,主要動態再結晶機制有連續動態再結晶和幾何動態再結晶。前者的形核機制主要為,原始晶界弓出形核和亞晶合并形核；后者歸因于嚴重的不均勻變形。在道次間的間隙期間,靜態再結晶發生。另外,尺寸大于1 μm的第二相也促進再結晶。

    Abstract:

    In this paper we report recrystallization characterizations, using electron back-scattered diffraction (EBSD) and transmission electron microscope (TEM), of an Al-Zn-Mg-Cu-Zr alloy during multi-pass plain strain compression (PSC) performed to simulate the hot rolling system on Gleeble-l500D thermo-mechanical simulator．The results show that with increase of the deformation, there are mainly two dynamic recrystallization mechanisms responsible for the development of new grain, including continuous dynamic recrystallization (CDRX) and geometry dynamic recrystallization (GDRX). The former is related to original grain boundaries bulging and sub-grain coalescence. The latter can be associated with serious deformation inhomogeneity. Besides, SRX happens during inter-pass time. The particles with a size of more than 1 μm also result in the recrystallization.

    參考文獻
    相似文獻
    引證文獻
引用本文

閆亮明,沈健,杜趙新,張建波.多道次熱軋模擬過程中Al-Zn-Mg-Cu-Zr合金的再結晶特征[J].稀有金屬材料與工程,2017,46(11):3233~3238.[Liang-ming Yan, Jian Shen, Zhaoxin Du, Jianbo Zhang. Recrystallization characterizations of an Al-Zn-Mg-Cu-Zr alloy during multi-pass hot rolling simulation[J]. Rare Metal Materials and Engineering,2017,46(11):3233~3238.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2015-11-25
  • 最后修改日期:2016-01-22
  • 錄用日期:2016-02-24
  • 在線發布日期: 2017-12-13
  • 出版日期: