最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
鉭鎢合金動態力學行為及其本構模型研究
DOI:
作者:
作者單位:

南京理工大學機械工程學院,南京理工大學機械工程學院,南洋理工大學,南京理工大學,南京理工大學,南京理工大學,中國兵器科學研究院寧波分院

作者簡介:

通訊作者:

中圖分類號:

TG 146.4

基金項目:

南京理工大學紫金之星項目資助


Dynamic behavior and constitutive model for two tantalum-tungsten alloys under elevated strain rates
Author:
Affiliation:

School of Mechanical Engineering, Nanjing University of Science & Technology,School of Mechanical Engineering, Nanjing University of Science & Technology,,,,,

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    本文對兩種鉭鎢合金（Ta-2.5W和Ta-10W，鎢的質量分?jǐn)?shù)分別為2.5 %和10 %）的準靜態和動態變形行為進行了系統研究。根據準靜態壓縮實驗、霍普金森壓桿（SHPB）實驗結果，表明兩種鉭鎢合金的屈服應力對加載應變率和鎢的含量較為敏感，并擬合得到了兩種鉭鎢合金的JC本構模型。其次，為驗證本構模型的合理性，開展了泰勒撞擊實驗和數值模擬研究，應變率范圍為103~104 s-1，數值模擬得到的泰勒桿側輪廓與撞擊端面輪廓與實驗吻合較好。最后，為研究鉭鎢合金變形后的細觀特性，對桿件進行了光學顯微照片分析。本文的研究方法與結果可為材料本構關系的確定提供借鑒。

    Abstract:

    In this paper, a systematic investigation on the quasi-static and dynamic deformation behavior of two tantalum-tungsten (Ta-W) alloys, namely Ta-2.5 weight percentage W (Ta-2.5W) and Ta-10 weight percentage W (Ta-10W), is presented. It is shown based on the performed SHPB and Taylor impact tests that the yield stresses of tantalum-tungsten alloys exhibit sensitivity to strain rate and W content. Based on the quasi-static and high strain-rate experimental data, the material constants in Johnson-Cook (JC) model were obtained for the two Ta-W alloys. In addition, validation of the derived constitutive model is carried out through comparison of Taylor impact inhomogeneous deformations under high strain rate (103~104 s-1), obtained from simulations, with their experimental counterparts. It is shown that the simulation results agree well with post-test geometries in terms of side profiles and impact-interface footprints for Taylor impact tests. To bridge the different spatial scale involved in the process of tantalum-tungsten alloy deformation, a meso-scale research is proposed via a optical microscope (OM) image analysis. The results presented in this paper, provide new insights into the mechanisms suitable for the constitutive relations determination process.

    參考文獻
    相似文獻
    引證文獻
引用本文

高飛,張先鋒,Serjouei Ahmad,王明洋,李磊,熊瑋,張將.鉭鎢合金動態力學行為及其本構模型研究[J].稀有金屬材料與工程,2017,46(10):2753~2762.[Gao Fei, Zhang Xianfeng, Serjouei Ahmad, Wang Mingyang, Li Lei, Xiong Wei, Zhang Jiang. Dynamic behavior and constitutive model for two tantalum-tungsten alloys under elevated strain rates[J]. Rare Metal Materials and Engineering,2017,46(10):2753~2762.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2015-10-11
  • 最后修改日期:2015-12-11
  • 錄用日期:2016-01-14
  • 在線發布日期: 2017-12-01
  • 出版日期: