最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
Effect of Cd Addition on Microstructure and Properties of Mg-Cd Binary Magnesium Alloy
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Effect of Cd Addition on Microstructure and Properties of Mg-Cd Binary Magnesium Alloy
Author:
Affiliation:

Fund Project:

National Natural Science Foundation of China (51275332); Doctoral Start-up Funding of Taiyuan University of Science and Technology (20122002)

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    研究了Cd對Mg-Cd二元合金組織和性能的影響。通過XRD、SEM和EDS對加入Cd鎂合金金相進行了檢測。研究結果表明：在純鎂中加入微量的Cd能明顯的細化組織，并且加入從0%到0.7% (質量分?jǐn)?shù))的Cd后，在Mg-Cd合金中沒有新相產生，Cd均勻、彌散的固溶在鎂基體中，使合金的沖擊韌度、布氏硬度分別提高了52.9%，11.9%，且隨著Cd加入量的增加，Mg-Cd二元合金的力學性能在逐漸的增加

    Abstract:

    The effects of Cd on the microstructure and the mechanical properties of Mg-Cd magnesium alloy were investigated. The Mg-Cd binary magnesium alloy was analyzed by metallograph, XRD, SEM and EDS examinations. The results show that the microstructure of the Mg-Cd magnesium alloy is refined obviously by adding a little amount of Cd. When Cd addition(wt%) is from 0% to 0.7%, the alloy is composed of α-Mg matrix. Cd dissolves in the matrix to form a solid solution, and there is no new phase formed, which contributes to the increase of the impact toughness, Brinell hardness of the experimental alloy by 52.9%, 11.9%, respectively. With the Cd content increasing, the mechanical properties of Mg-Cd magnesium alloy are improved accordingly

    參考文獻
    相似文獻
    引證文獻
引用本文

高 珊,任樹杰,劉翠榮,吳志生,李宏戰. Effect of Cd Addition on Microstructure and Properties of Mg-Cd Binary Magnesium Alloy[J].稀有金屬材料與工程,2015,44(10):2401~2404.[Gao Shan, Ren Shujie, Liu Cuirong, Wu Zhisheng, Li Hongzhan. Effect of Cd Addition on Microstructure and Properties of Mg-Cd Binary Magnesium Alloy[J]. Rare Metal Materials and Engineering,2015,44(10):2401~2404.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2014-10-23
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2016-07-13
  • 出版日期: