3、72.3 HRB和579MPa。"/>

最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
不同熱塑性蠟基粘接劑對316L注射成型件性能的影響
DOI:
作者:
作者單位:

合肥工業大學材料科學與工程學院,合肥工業大學材料科學與工程學院,合肥工業大學材料科學與工程學院,合肥工業大學材料科學與工程學院,合肥工業大學材料科學與工程學院,合肥工業大學材料科學與工程學院,合肥工業大學材料科學與工程學院,合肥工業大學材料科學與工程學院,合肥工業大學材料科學與工程學院

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家高技術研究發展計劃（863計劃）


Effects of different thermoplastic wax-based binders on properties of 316L stainless steel injection molding parts
Author:
Affiliation:

School of Materials Science and Engineering,Hefei University of Technology;China,School of Materials Science and Engineering,Hefei University of Technology;China,School of Materials Science and Engineering,Hefei University of Technology;China,School of Materials Science and Engineering,Hefei University of Technology;China,School of Materials Science and Engineering,Hefei University of Technology;China,School of Materials Science and Engineering,Hefei University of Technology;China,School of Materials Science and Engineering,Hefei University of Technology;China,School of Materials Science and Engineering,Hefei University of Technology;China,School of Materials Science and Engineering,Hefei University of Technology;China

Fund Project:

Aeronautical Science Foundation of China (2011ZE53059); National Natural Science Foundation of China (51275414); The Qualified Personnel Foundation of Taiyuan University of Technology (tyut-re201441a)

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    用金屬注射成型方法研究三種熱塑性蠟基粘接劑(高密度聚乙烯、高密度聚乙烯/聚丙烯、聚丙烯)對316L不銹鋼尺寸穩定性及其機械性能的影響,對三種熱塑性蠟基粘接劑溶劑脫脂過程進行了分析。實驗結果表明用高密度聚乙烯/聚丙烯熱塑性蠟基粘接劑得到的316L不銹鋼注射成型件尺寸穩定性及機械性能較好,溶劑脫脂時間較短、效果較好,其長、寬、高三維尺寸穩定性比聚丙烯熱塑性蠟基粘接劑得到的注射成型件分別高46 %,40 %,20 %,密度、硬度和拉伸強度分別為7.28 g/cm3、72.3 HRB和579MPa。

    Abstract:

    A thorough of thermoplastic polymer in the wax-based binder is essential for ensuring the dimensions and mechanical properties of 316L stainless steel metal injection molding parts. The effects of three thermoplastic polymers, High density polyethylene, High density polyethylene /Polypropylene and Polypropylene, on the dimensions and mechanical properties of 316L stainless steel metal injection molding parts have been compared in this paper. The tensile bar is tested to examine the dimensions and mechanical properties of sintered parts against different thermoplastic polymers in the binder. Among the three thermoplastic polymers in the binder considered herein, High density polyethylene /Polypropylene performs better than the others in solvent debinding stage and in terms of the metal injection molding compact quality. High density polyethylene /Polypropylene has significantly better length, width and thickness by up to 46%, 40%, 20%, respectively. The density, hardness and tensile strength of the sintered parts are 7.28 g/cm3, 72.3 HRB and 579MPa.

    參考文獻
    相似文獻
    引證文獻
引用本文

豆亞坤,鳳儀,黃曉晨,湯海,丁冬冬,田沛,夏夢,錢剛,張學斌.不同熱塑性蠟基粘接劑對316L注射成型件性能的影響[J].稀有金屬材料與工程,2017,46(10):2775~2780.[Dou Ya-kun, Feng Yi, Huang Xiao-chen, Tang Hai, Ding Dong-dong, Tian Pei, Xia Meng, Qian Gang, Zhang Xue-bin. Effects of different thermoplastic wax-based binders on properties of 316L stainless steel injection molding parts[J]. Rare Metal Materials and Engineering,2017,46(10):2775~2780.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2015-10-07
  • 最后修改日期:2016-01-13
  • 錄用日期:2016-01-14
  • 在線發布日期: 2017-12-01
  • 出版日期: